Rechercher

1. Scope 1.1 This standard applies to the design, manufacture and use of intermediate bulk containers (IBCs) for the transportation of dangerous goods classed as flammable, oxidizer, organic peroxides, poisonous, corrosive, or Class 9 dangerous goods as defined by the Transportation of Dangerous Goods (TDG) Regulations. Sections 4, 5 and 6 contain the testing (design) and manufacturing…

This National Standard of Canada is equivalent to International Standard ISO 2551:1981. 1 Scope and field of application This International Standard specifies a procedure for the determination of the dimensional changes that take place when machine-made textile floor coverings are subjected to varied water and heat conditions. The method is applicable to all machine-made textile floor…

1. Scope 1.1 This standard applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark ignition engines under a wide range of climatic conditions. 1.2 Gasoline specified in this standard may contain Methyl Tertiary Butyl Ether (MTBE) or other aliphatic ethers.

1. Scope 1.1 This standard applies to high-flash type aviation turbine fuel consisting entirely of hydrocarbon compounds, unless otherwise specified. 1.2 This standard describes a military grade fuel normally used in naval operations whose product quality parameters are influenced by international Military Standardization Agreements. 1.3 The testing and evaluation of a product against…

1. Scope 1.1 This standard applies to three grades of aviation gasoline consisting entirely of hydrocarbons except as otherwise specified herein. 1.2 This standard describes a product intended for use in internal combustion aircraft engines with spark ignition. 1.3 Operators should refer to their aircraft manual for the appropriate grade. 1.4…

1. Scope 1.1 This standard applies to four grades of oxygenated gasoline to which no lead or phosphorus compounds have been added and in which the oxygenate consists essentially of C3, C4 and/or C5 alcohols. They are intended for use in spark ignition engines under a wide range of climatic conditions. 1.2 Some fuel systems may not be fully…

This National Standard of Canada is equivalent to International Standard ISO 6941:1984. 1 Scope and field of application This International Standard specifies a method for the measurement of flame spread properties of vertically oriented textile fabrics intended for apparel, curtains and draperies in the form of single- or multi-component (coated, quilted, multilayered, sandwich…

This National Standard of Canada is equivalent to International Standard ISO 6940:1984. 1 Scope and field of application This International Standard specifies a method for the measurement of ease of ignition of vertically oriented textile fabrics intended for apparel, curtains and draperies in the form of single- or multi-component (coated, quilted, multilayered, sandwich construction…

This National Standard of Canada is equivalent to International Standard ISO 10047:1993. 1 Scope This International Standard specifies a method for the measurement of surface burning time of textile fabrics which have a raised fibre surface, i.e. a napped, pile, tufted, flocked or similar surface.

1. Scope 1.1 This Standard applies to both cord-connected and permanently connected storage-tank water heaters*, having tanks less than 610 mm inside diameter, for use on nominal system voltages of 600 V and less, and designed to be used in nonhazardous household and commercial locations in accordance with the Rules of the Canadian Electrical Code, Part I. *For convenience only, the…