Inorganic soil conditioners - Liming Materials from Industrial Processes
1 PURPOSe
The purpose of this standard is to specify the characteristics of liming
materials from industrial processes as well as the criteria and test methods
for verifying these characteristics.
2 SCOPe
This standard applies to industrial products and by-products destined for use
as soil amendments, in keeping with agronomical or silvicultural principles,
and which derive from…
Electromagnetic compatibility (EMC) - Part 1: General - Section 1: Application
and interpretation of...
This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-1-1:1992
1 Scope
The object of this report is to desribe and interpret various terms considered
to be of basic importance to concepts and practical application in the design
and evaluation of electromagnetically compatible systems. In addition,
attention is drawn to the distinction between electromagnetic…
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Description of the environmen...
This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-2-1:1990.
1 Scope
This section of IEC 1000-2 is concerned with conducted disturbances in the
frequency range up to 10 kHz with an extension for mains signalling systems.
Separate sections give numerical compatibility levels for different system
voltage levels.
This section does not deal with the application…
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 2: Compatibility levels for low-...
This National Standard of Canada is based on International Standard CEI/IEC 1000-2-2:1990.
1 Scope
This section of IEC 1000-2 is concerned with conducted disturbances in the
frequency range up to 10 kHz with an extension for mains signalling systems.
This section gives numerical compatibility levels for low voltage a.c.
distribution systems with a nominal voltage up to 347 V, single-…
Standard for Mineral Fibre Thermal Insulation for Buildings
1. SCOPe
1.1 This standard applies to mineral fibre thermal insulation manufactured in
the form of faced and unfaced batts, rolls, boards and sheets. Where facings
are used, they shall be either permeable or vapour retarding membranes, as
defined in Table 1 for Types 2 and 3, respectively. This standard does not
permit the application of kraft paper facings on batts and rolls. It also…
Insulating Oil, Electrical for Transformers and Switches
1. Scope
1.1
This Standard specifies the requirements for mineral oil of petroleum origin
for use in transformers, oil circuit breakers, or other electrical equipment
(excluding high-voltage cables) requiring a liquid insulating and cooling
medium.
Amendements minéraux - Amendements calciques ou magnésiens provenant de
procédés industriels
1 OBJET
La présente norme a pour objet de spécifier les caractéristiques des
amendements calciques ou magnésiens provenant de procédés industriels, ainsi
que les critères et les méthodes d'essai permettant d'en évaluer les
caractéristiques.
2 DOMAINE D'APPLICATIOn
La présente norme s'applique aux produits et aux sous-produits industriels qui
sont…
Radiation protection instrumentation - Measurement of discrete radionuclides in the environment - In...
Specifies the functions and performance characteristics of measuring assemblies and the methods of test to be used to determine compliance with the requirements of this standard.
Industrial a.c. networks affected by harmonics - Application of filters and shunt capacitors
Gives guidance for the use of passive a.c. harmonic filters and shunt capacitors for the limitation of harmonics and power factor correction intended to be used in industrial applications, at low and high voltages. The measures proposed in this standard are applicable to harmonic orders greater than 1 and up to and including 25.
Unplasticized Poly(Vinyl Chloride) (PVC) Rigid Pipe and Fittings, 150 mm inDiameter or Smaller, for ...
1. PURPOSE AND SCOPe
The purpose of this standard is to establish requirements for dimensions,
characteristics and test methods relating to rigid pipe* and fittings,
manufactured from PVC compounds, used in underground applications for conveying
wastewaters flowing by gravity.
It applies to rigid, non-perforated, smooth interior wall (see note), pipe and
fittings with a nominal diameter…
