Electric Power Connectors for Use in Overhead Line Conductors
1. Scope
1.1
This Standard specifies requirements for the mechanical, electrical, and
environmental performance of connectors designed for installation on the bare
surface of overhead line conductors.
Note: Although the requirements of this Standard were developed primarily for
connections to aluminum conductors, the requirements are also applicable to
connectors for copper-to-copper or aluminum…
1. Scope
1.1
This Standard specifies the chassis and body requirements for school buses.
1.2
This standard applies to Types A1, A2, B, C, and D school buses.
1.3
This Standard does not cover after-market and retrofit installations. These
installations are covered by federal and provincial regulations and it is the
responsibility of the appropriate jurisdiction to inspect and…
Quality management and quality assurance standards - Part 2: Generic guidelines for the application ...
This National Standard of Canada is equivalent to International Standard ISO 9000-2:1997.
1 Scope
This part of ISO 9000 gives guidance on the application of the 1994 versions of
ISO 9001, ISO 9002 and ISO 9003.
It does not add to, or otherwise change, the requirements of ISO 9001, ISO 9002
or ISO 9003. In the case of conflicting interpretations of ISO 9001, ISO 9002
or ISO 9003 on…
1.1 SCOPE
1.1.1 This standard applies to newly produced vented gas-fired space heating
appliances (see Part XIV, Definitions), hereinafter referred to as
appliance(s), constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use with manufactured gas;
c. For use with mixed gas;
d…
1.1 SCOPE
1.1.1 This standard applies to newly produced gas appliance connectors constructed entirely of new, unused parts and materials that:
a. Are intended for use with gas-fired commercial cooking equipment that may be mounted on casters or otherwise be subject to movement for cleaning, and with other large and heavy gas-fired equipment that may be moved;
b…
1.1 SCOPE
1.1.1 This Standard covers CGA 791 (Type I) and CGA 810 (Type II) cylinder
connection devices, as defined in Part IV, Definitions, intended to
connect the cylinder valve on portable LP-Gas containers to the inlet
of the regulator on outdoor cooking gas appliances. These cylinder
connection devices are intended for vapour withdrawal service only…
Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing (CSST)
1.1 SCOPE
1.1.1 This standard applies to natural and propane gas piping systems using
corrugated stainless steel tubing (CSST), intended for installation in
residential or commercial buildings, and including the following
components as a minimum:
a. Corrugated stainless steel tubing (CSST);
b. Fittings for connection to the CSST; and…
Quick Disconnect Devices for Use with Gas Fuel Appliances
1.1 SCOPE
1.1.1 This standard applies to newly-produced, hand-operated quick-disconnect devices, hereinafter also referred to as devices, constructed entirely of new, unused parts and materials which provide a means for connecting and disconnecting appliances or appliance connectors to gas supplies and which are for indoor and outdoor applications. These devices shall be equipped with…
1.1 SCOPe
1.1.1 This standard applies to line pressure regulators, (see Part V,
Definitions), constructed entirely of new, used parts and materials,
hereinafter referred to as regulator(s), either individual or in
combination with over pressure protection devices, hereinafter referred
to as device(s), intended for application in natural gas piping systems…
Gas Water Heaters
Volume 1, Storage Water Heaters With Input Ratings of 75,000 Btu Per Hour or
Les...
1.1 SCOPe
1.1.1 This standard applies to newly produced, automatic storage water
heaters having input ratings of 75,000 Btu per hour (21 980 W) or less
(see Part IV, Definitions) hereinafter referred to as water heaters or
appliances, constructed entirely of new, unused parts and materials:
a. For use with natural gas;
b. For use…
