Metallic materials — Determination of forming-limit curves for sheet and strip — Part 2: Determinati...
This document specifies testing conditions for use when constructing a forming-limit curve (FLC) at ambient temperature and using linear strain paths. The material considered is flat, metallic and of thickness between 0,3 mm and 4 mm.
NOTE The limitation in thickness of up to 4 mm is proposed, giving a maximum allowable thickness to the punch diameter ratio.
Health and safety in welding and allied processes — Laboratory method for sampling fume and gases — ...
ISO 15011-4:2017 covers health and safety in welding and allied processes. It specifies requirements for determination of the emission rate and chemical composition of welding fume in order to prepare fume data sheets.
ISO 15011-4:2017 applies to all filler materials used for joining or surfacing by arc welding using a manual, partly mechanized or fully automatic process, depositing unalloyed…
Safety requirements for electrical equipment for measurement, control, and laboratory use - General ...
IEC/TS 62850:2013 specifies general safety requirements for the following types of equipment and their accessories intended to be used in educational establishments by persons between the age of 3 years and the age of 16 years under the supervision of the RESPONSIBLE BODY. If all or part of the equipment falls within the scope of one or more part 2 standards of IEC 61010 as well as within the…
Acoustics — Laboratory measurement of the flanking transmission of airborne and impact sound between...
ISO 10848-1:2006 contains definitions, general requirements for test specimens and test rooms, and methods for measurement of the flanking transmission. Guidelines are given for the selection of the quantity to be measured depending on the junction and the types of building elements involved.
