Rechercher

1. Scope 1.1 General Test methods in this Standard address the chemical analysis of hydraulic cement and supplementary cementing materials. At the discretion of the laboratory, alternative methods demonstrated to be of acceptable precision and bias that further satisfy the qualification criteria of Clause 3 may be used for analysis. 1.2 Test Frequencies Refer to Table 1 of CSA…

1 Scope 1.1 General This Standard applies to targeted qPCR-based eDNA assays used to conduct eDNA biological surveys or assessments. This Standard provides performance criteria pertaining to a) reporting; b) analytical performance including i) specificity; ii) sensitivity; iii) quantification; iv) repeatability; and v) reproducibility; and c) field application criteria…

1 Scope 1.1 Purpose This Standard specifies general requirements related to the safety of human CTOs used for transplantation, and includes quality system requirements. It includes aspects of safety for potential and actual donors and recipients, personnel, and others who might be exposed to or affected by the transplantation of CTOs. 1.2 Areas of application This Standard applies to…

1.1 This Standard specifies common requirements for the management of radioactive waste and irradiated fuel from generation to storage or disposal. 1.2 This Standard is used in concert with all CSA standards that apply to the management of radioactive waste and irradiated fuel. Note: For example, CSA N292.2, CSA N292.3, CSA N292.5, and CSA N294. 1.3 This Standard applies to waste…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for HAND-HELD and hand-manipulated current sensors described below. These current sensors are for measuring, detecting or injecting current, or indicating current waveforms on circuits…

1. Scope 1.1 This Standard applies to vacuum breakers for use on laboratory faucets. 1.2 Laboratory faucet vacuum breakers are installed on the discharge side of the last control valve and are not intended for use under constant pressure conditions.

This National Standard of Canada is based on International Standard ISO 15189:2003 (first edition, 2003-02-15). 1 Scope This International Standard specifies requirements for quality and competence particular to medical laboratories.

CAN/CSA-A5-98 Portland Cement 1. Scope 1.1 Scope This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage. 1.2 Types The five types of Portland cement covered in this Standard are identified as follows: Type…

This National Standard of Canada is based on International Standard ISO 15190:2003. 1 Scope This International Standard specifies requirements for safe practices in the medical laboratory.

1 Scope 1.1 General This Standard pertains to the characterization of radioactive waste and irradiated fuel. This Standard a) specifies the overall requirements for establishing and implementing a waste characterization strategy, program, and plan; b) specifies methodologies for the sampling and characterization of radioactive waste and irradiated fuel; c) provides guidance for the timing…