Rechercher

This part of ISO 10079 specifies safety and performance requirements for medical suction equipment powered from a vacuum or positive pressure gas source generating venturi suction. It applies to equipment connected to medical gas pipeline systems or cylinders and venturi attachments. Annex D illustrates the three parts of ISO 10079 by providing a schematic for typical systems. The equipment…

Scope Z217.1 1.1 This practice outlines a method for the determination of the dilute solution viscosity of polystyrene products in tetrahydrofuran (THF). It is applicable to nondegraded and photodegraded polystyrene samples. It is used for the determination of relative viscosity (viscosity ratio), inherent viscosity (logarithmic viscosity number), intrinsic viscosity (limiting…

1 Scope This part of ISO/IEC 18013 specifies the test methods used for conformity testing, that is methods for determining whether a driving licence can be considered to comply with the requirements of ISO/IEC 18013 for: ? machine-readable technologies (ISO/IEC 18013-2), and ? access control, authentication and integrity validation (ISO/IEC 18013-3). The test methods specified in this part of…

This National Standard of Canada is equivalent to International Standard ISO 9919:1992. 1.1 Scope ISO 9919 is one of a series of International Standards based on IEC 601-1; in IEC 601-1 (the General Standard), this type of International Standard is referred to as a Particular Standard. As stated in 1.3 of IEC 601-1:1988, the requirements of this International Standard take precedence…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1010-2-032:1994. 1 Scope and object This clause of part 1 is applicable, except as follows: 1.1 Scope Replace the text by the following: This International Standard applies to hand-held and hand-manipulated CURRENT CLAMPS. These CURRENT CLAMPS are for use in the measurement of current without interruption of…

This National Standard of Canada is based on International Standard IEC 1010-2-031:1993. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…

1.1 Outlines the details of construction, marking, and testing of portable electrical instruments for sensing the presence of toxic gas(es) and/or oxygen concentrations in air. These instruments may be used in Class I hazardous locations and gaseous mines in accordance with the Rules of the Canadian Electrical Codes, Parts I and II. 1.2 This Standard applies to battery-operated…

1 Scope and object This part of IEC 61000 relates to the immunity requirements and test methods for electrical and electronic equipment, under operational conditions, to non-repetitive damped oscillatory transients (ring waves) occurring in low-voltage power, control and signal lines supplied by public and non-public networks. The object of this basic standard is to establish the immunity…

Scope Replacement: This part of IEC 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of SCREENING THERMOGRAPHS intended to be used for the individual non-invasive febrile temperature screening of a human under controlled environmental conditions, hereafter referred to as ME EQUIPMENT. This document sets laboratory characterization test limits for the SCREENING THERMOGRAPH. NOTE…

1 Scope and object IEC 61010-1:2010, Clause 1 and IEC 61010-1:2010/AMD1:2016, Clause 1 apply except as follows: 1.1.1 Equipment included in scope Replace the existing text with the following: This document specifies safety requirements to equipment for measuring insulation resistance and to equipment for testing electric strength which have an output voltage exceeding 50 V a.c. or 120 V d.…