Rechercher

1 Scope 1.1 General This Standard provides a common set of safety indicators for use in process, operations, and safety management for passenger and transit railway systems in Canada. 1.2 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a…

1 Scope 1.1 Inclusions This Standard applies to the design, installation, operation, maintenance, and testing of generator sets and associated equipment for providing an emergency electrical power supply to electrical loads a) in buildings and facilities when the normal power supply fails, and an emergency electrical power supply is required by the National Building Code of Canada (NBCC); and…

1 Domaine d’application 1.1 Inclusions Cette norme s’applique à la conception, à l’installation, au fonctionnement, à l’entretien et aux essais des groupes électrogènes et l’équipement connexe dont le rôle est d’assurer l’alimentation électrique de secours des charges électriques : a) dans des bâtiments ou des installations en cas de panne de l’alimentation normale, lorsqu’une alimentation…

1 Domaine d’application 1.1 Inclusions La présente norme vise les ventilateurs-récupérateurs de chaleur/énergie (VRC/VRE) monoblocs constitués d’éléments assemblés en usine, y compris de ventilateurs et de soufflantes, dans lesquels la chaleur ou la chaleur et l’humidité sont transférées entre deux flux d’air séparés. La présente norme précise des méthodes d’essai en laboratoire et des…

1 Scope This Standard applies to wrought steel enclosures and their welding. These enclosures are pressurized with dry air, inert gases or gas mixtures (see Note 1) used in indoor or outdoor installations of highvoltage switchgear and controlgear, where the gas is used principally for its dielectric or arc-quenching properties, with rated voltages – of 1 kV and up to and including 52 kV,…

1 Scope This Standard applies to gas-filled welded composite enclosures of cast and wrought aluminium alloys pressurized with dry gases and gas mixtures (see Note 1) used in indoor or outdoor installations of highvoltage switchgear and controlgear, where the gas is used principally for its dielectric or arc-quenching properties, with rated voltages – of 1 kV and up to and including 52 kV,…

1 Domaine d’application 1.1 Équipement relevant du domaine d’application Sauf ce qui est indiqué à l’article 1.2, cette norme s’applique à tout équipement sous pression, y compris : a) les chaudières, les appareils sous pression, la tuyauterie sous pression et les accessoires régis par la loi (et définis à l’article 3) et indiqués dans cette norme; et b) les tuyauteries et les récipients de…

1 Scope 1.1 Inclusions This Code applies to the portions of a motor vehicle maintenance facility where propane-fuelled on-road vehicles are maintained, repaired, or stored during maintenance or repair, including ancillary areas and systems. This applies to where the fuel system is for motive power of the vehicle. 1.2 Exclusions This Code does not apply to a) motor vehicle repair procedures…

1 Scope 1.1 Safety guidance for use of energy-based medical and surgical devices This Standard presents guidance to ensure the safety of persons at risk in locations where energy-based medical and surgical devices are used. This includes but is not limited to guidance on purchasing, education, training, installation, use, servicing, maintenance, engineering and administrative controls, and…

1.1 Scope [ Replace this clause with the following] This Standard applies to cast aluminium alloy enclosures pressurized with dry gases and gas mixtures (see Note 1) used in indoor or outdoor installations of high-voltage switchgear and controlgear, where the gas is used principally for its dielectric or arc-quenching properties, with rated voltages – of 1 kV and up to and including 52 kV,…