Rechercher

ISO 19365:2016 specifies a method for comparing computer simulation results from a vehicle mathematical model to test data measured for an existing vehicle undergoing sine with dwell tests that are typically used to evaluate the performance of an electronic stability control (ESC) system. The comparison is made for the purpose of validating the simulation tool for this type of test when applied…

ISO 14224:2016 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data collection principles and associated terms and definitions that constitute a "reliability…

ISO/TS 19700:2016 describes a steady-state tube furnace (SSTF) method for the generation of fire effluent for the identification and measurement of its constituent combustion products, in particular, the yields of toxicants under a range of fire decomposition conditions. It uses a moving test specimen and a tube furnace at different temperatures and airflow rates as the fire model. The…

ISO 6385:2016 establishes the fundamental principles of ergonomics as basic guidelines for the design of work systems and defines relevant basic terms. It describes an integrated approach to the design of work systems, where ergonomists will cooperate with others involved in the design, with attention to the human, the social and the technical requirements in a balanced manner during the design…

IEC 60695-10-3:2016 specifies a mould stress relief distortion test. It is applicable to electrotechnical equipment including parts made from polymeric materials. This test method is intended to evaluate the effects caused by relief of the residual process-induced stress, set in a moulded polymeric assembly of an end product. This stress relief occurs when the sample (energized or not), is…

IEC 61853-2:2016 defines measurement procedures for measuring the effects of angle of incidence of the irradiance on the output power of the device, determines the operating temperature of a module for a given set of ambient and mounting conditions and measure spectral responsivity of the module. A second purpose is to provide a characteristic set of parameters which will be useful for detailed…

ISO 17851:2016 provides a general description of the whole set of space environment components which affect spacecrafts in various outer space regions, and the physical and chemical processes causing material degradation in a space environment, including synergistic effects. This International Standard defines the most important general principles and criteria of space environment simulation…

ISO/CIE 11664-5:2016 specifies the method of calculating the coordinates of the CIE 1976 L*u*v* colour space including correlates of lightness, chroma, saturation and hue. It includes two methods for calculating Euclidean distances in this space to represent the relative perceived magnitude of colour differences. It also specifies the method of calculating the coordinates of the u′,v′ uniform…

1.1 General 1.1.1 This Standard provides requirements and guidance for managing configuration at high energy reactor facilities (hereinafter referred to as “facility”) from initial conception to cessation of operations. Notes: 1) High energy reactor facilities is defined in Clause 7.1 of CSA N286. 2) This Standard provides requirements and guidance supplementing the management system…

1.1.1 This Standard defines minimum requirements for a supplier’s quality assurance program (hereafter referred to as “QA program”) for existing nuclear power plants — Category 1. Notes: 1) This Standard does not include a separate implementation guide; instead, relevant guidance is found throughout the Standard as notes, or within the relevant annex (see Annexes B through E). 2) This…