Rechercher

1 Scope 1.1 This Standard specifies the requirements for three-phase, pad-mounted distribution transformers, consisting of a transformer and a cable entrance compartment with provision for separable insulated high-voltage connectors, intended primarily for operation by electric utilities on three-phase underground distribution systems having primary voltages as shown in Clause 4.6. 1.2…

1 Scope, objectives, and application 1.1 Scope This Standard provides requirements for all life cycle phases of thermosyphon foundations for new buildings on permafrost, including site characterization, design, installation, and commissioning phases as well as for monitoring and maintenance phases. This Standard is meant to ensure the long-term performance of thermosyphon-supported…

1 Scope 1.1 This Standard provides requirements, recommendations, and guidance for understanding the potential risks to biomass supply chains, including the following risk categories and associated risk factors: a) supplier risk (including credit-worthiness/problematic future solvency of supplier; supplier contracts; supply inventory; conflicts of interest/vested interest with competing…

1 Scope 1.1 General This Standard establishes minimum requirements for pressure relief devices intended for use on fuel containers that comply with CSA/ANSI HGV 2, CSA B51, Part 2, or SAE J2579. Pressure relief devices designed to comply with this Standard are intended to be used with hydrogen fuel complying with SAE J2719 or ISO 14687. Pressure relief devices may be of any design or…

1 Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the existing text with the following: This part of IEC 61010 specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when…

1 Scope This document is intended to be used in any sector of activity. It specifies: — contents of command-response pairs exchanged at the interface, — means of retrieval of data elements and data objects in the card, — structures and contents of historical bytes to describe operating characteristics of the card, — structures for applications and data in the card, as seen at the interface…

1 Scope The ISO/IEC 10373 series defines test methods for characteristics of identification cards according to the definition given in ISO/IEC 7810. Each test method is cross-referenced to one or more base standards, which can be ISO/IEC 7810 or one or more of the supplementary standards that define the information storage technologies employed in identification card applications. NOTE 1…

1 Scope This part of ISO/IEC 15459 specifies a unique string of characters for the identification of individual transport units. The character string is intended to be represented in a bar code label or other AIDC media attached to the entity to meet management needs. To address management needs, different types of entities are recognized in the various parts of ISO/IEC 15459, which allows…

1 Scope The data protocol used to exchange information in an RFID system for item management is specified in ISO/IEC 15961 and in this International Standard. Both International Standards are required for a complete understanding of the data protocol in its entirety; but each focuses on one particular interface: ? ISO/IEC 15961 addresses the interface with the application system. ? This…

1 Scope The purpose of storing IDL data on machine-readable media on the IDL is to: — increase productivity (of data and IDL use), — facilitate electronic data exchange, and — assist in authenticity and integrity validation. This document thus specifies the following: — mandatory and optional machine-readable data; — the logical data structure; — encoding rules for the machine-readable…