Rechercher

Relates to C6 to C13 alcohols. The principle consists in distillation of a test portion, under carefull defined conditions. For measurement of distillation intervals not greater than 5 °C, the thermometer hsall be graduated at intervals of 0,2 °C; for intervals greater than 5 °C, the thermometer shall be graduated at intervals of 0,5 °C. Adjusting the rate of heating so that the first drop of…

This part of ISO 4948 defines steel and gives 2.0 % carbon as the usual dividing line between steel and cast iron. The classification based on the specified values for the ladle analyses of the elements given in the table.

1. Scope 1.1 This Standard sets forth the requirements for the construction, test, and operation of permanently or cord-connected 120 V ac detertors and 12 V dc deterctors, intended for use in the home and in recreational vehicles, for the detection of fuel gases (natural gas, methane, and propane), in accordance with the Canadian Electrical Code, Part I. No other function is implied or…

Defines, in both English and French, terminology pertaining to dental science, dental materials, dental equipment and the practice of dentistry. Establishes translations of terms between the two official languages. It is anticipated that additions to the contents of the standard will be made annually.

Defines the effective case depth, and specifies methods for the determination of this depth, in steel. Is applicable to carburized cases and carbo-nitrided cases, the depth of which is greater than 0,3 mm, and parts which have a hardness of less than 450 HV at a distance of 3 X the effective case depth from the surface.

Defines certain notions used for the geometric description of an aircraft for the purpose of flight dynamic studies. Does not give all the definitions that permit the detailed description of the shape of the aircraft. The aircraft is considered to be made up of various components. Defines general characteristics, overall dimensions of the aircraft, ground limit angles, fuselage, aerodynamic…

Defines three positions of the modular floor plane as reference plane for vertical modular dimensions in building design and gives rules for the position of the floor in relation to this plane. Applies to the construction of buildings of all types designed in accordance with the principles and rules of modular coordination as laid down in ISO 2848.

Applies to transverse track recorders, i.e. recorders making use of four video heads rotating in a plane perpendicular to the direction of tape motion. Defines the electrical and mechanical characteristics of equipment which will provide for interchangeability of recordings. This standard is in accordance with ITU-R specifications, unless otherwise specified.

Defines the general principles and the technical details of the measurement of the magnetic properties of magnetic sheets, at power frequencies, by means of a single sheet tester. This tester is applicable to flat plate specimens obtained from magnetic sheets and strips of any quality. The magnetic characterictics are determined for a sinusoidal induced voltage, for specified peak values of…

Describes the concept of maintainability, defines the general approach and gives the objectives of maintainability. Gives the maintainability requirements for specifications and contracts and describes the contents of maintainability programmes. Sections 1 and 3 are replaced by IEC 60300-3-10 (2000).