Conditioning and testing — Standard atmospheres — Definitions
Defines three types. They are often required in order to investigate the effect of extreme climatic conditions on test specimens. Such atmospheres often differ greatly from ordinary ambient conditions.
The terms defined may be used in the determination of the commercial mass of a consignment textile material, in the determination of linear, area and volume densities of textile materials and in the determination of a composition by mass of the different components of a mixture of textile fibres.
Fluid power systems and components — Cylinder barrels — Part 1: Requirements for steel tubes with sp...
This part covers only one specific type of steel tubing suitable for fluid power cylinders. Specifies the mechanical properties, dimensional tolerances, surface finishes, and technical delivery conditions for round steel tubes, seamless or welded type, and defines the tube dimensions by inside diameter and thickness, or inside diameter and outside diameter. Annex A specifies the tolerances on…
Specifies a procedure for approximating the volume of typical materials carried in dumper bodies. The volumes are based on the inside dimensions of the bodies and representative volumes on top of the bodies. This rating method is intended to be a consistent means of comparing body capacities; it is not intended to define actual capacities that might be observed in any specific application.
Specifies a procedure for approximating the volume of typical materials contained in the bowl of open bowl scrapers. The volumes are based on the inside dimensions of the bowl and representative volumes on top of the bowl. This rating method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific…
Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance l...
These limits are generally appropriate for the products listed. If, however, an International Standard has been issued for an individual product, the method specified there shall be used. Does not apply to articles whose surfaces are composed of mixtures of insulating and conducting areas or articles with substantial surface area of insulating material. A defined system of electrodes is used for…
Products in fibre reinforced cement — Part 2: Silica-asbestos-cement flat sheets
Specifies the characteristics of silica asbestos-cement flatsheets, and establishes the control and testing methods for the verification and determinition of the specified values. Classifies the flat sheets in two categories according to the value of the minimum bending strength. Defines also marking, sampling and acceptance tests. Asbestos-cement flat sheets are dealt with in ISO 396-1 and…
1. Scope
1.1 This Standard applies to add-on heat pumps for comfort heating or heating
and cooling not exceeding 20 kW in the cooling mode and rated at 600 V or less,
single or polyphase, intended to utilize the fan assemblies and duct work of
the existing installed furnaces to form the complete functional systems where
the existing parts are not covered by this Standard.
Note: For…
Textile machinery and accessories — Winding — Basic terms
Defines basic terms used in the winding of yarns, onto formers or other suitable devices, by means of winding machines. This does not exclude the use of the terms in question for other textile processes, for example, spinning or twisting. Also applicable to yarn-like textile materials such as filaments and man-made tapes.
