Basic quantities in cutting and grinding — Part 4: Forces, energy, power
This part of ISO 3002 defines forces and torques exterted by a tool or by the cutting part on the workpiece, energy and power for particular operations on specific machine tools and details of individual quantities. Contains terms in English, French and Russian as well as the equivalent terms in German, Italian and Dutch.
Textile machinery — Dyeing and finishing machines — Definition of left and right sides
Defines the left and right sides of dyeing and finishing machines so that the positioning of the various parts may be described without ambiguity, in particular when ordering. Applicable to individual machines in which the textile material follows a predetermined path, but not applicable to assemblies of machines in plants. - Replaces the first edition (ISO 1036-1976) and constitutes its…
Balancing machines — Enclosures and other safety measures
Specifies requirements used to minimize hazards associated with the operation of these machines under a variety of rotor and balancing conditions. Defines different classes of protection and describes the limits of applicability for each class of protection. Noise reduction, windage reduction or vacuum are not covered.
Building construction — Jointing products — Sealants — Determination of tensile properties at mainta...
Specifies a method for the determination of the tensile properties at maintained extension of sealants used in joints in building construction. The sealant to be tested adheres to two parallel contact surfaces of prepared test specimens which are extended to a defined width. The extension is maintained under defined conditions. Any breaks in adhesion or cohesion are recorded.
Road vehicles — Diesel engines — Screw-in injector, type 22
Specifies dimensional requirements for the mounting of injectors in diesel engines. The location of the fuel inlet is not defined since it varies with the particular application. Applies to the complete screw-in injector of type 22. A figure illustrates the shape and reference quantities of concern.
Specifies the characteristics that define instrument precision rolling bearings, their types, boundary dimensions, tolerances and internal clearance, classifications used for selective assembly, torque definitions and test conditions, and limitations of bearing yield rates.
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting
This part of ISO 3002 deals specially with the geometric and kinematic quantities in cutting. Is generally applicable to all machining operations, including grinding. Defines feed , cutting edge and related quantities, engagment, cut and pass and their dimensions. and the material removal rate respectively. Contains terms in English, French, Russian as well as equivalent terms in German, Italian…
Building construction — Modular coordination — System of preferred numbers defining multimodular siz...
Establishes a system of preference for numbers for use as the numerical factor in multimodular sizes especially for horizontal dimensions in building, and guidance for its use. Is applicable to buildings of all types designed in accordance with the principles and rules of modular coordination as laid down in ISO 2848.
Lifts and service lifts (USA : elevators and dumbwaiters) — Part 6: Passenger lifts to be installed ...
Lays down the appropriate rules applying to standardized lifts of class I and permitting the number of lifts and their main characteristics to be defined at the very beginning of building design. Three quality levels are specified for the lift service. Part 1 covers the lifts of classes I, II and III, part 2 the lifts of class IV, part 3 service lifts of class V and part 5 control devices,…
Defines terms relating to gas analysis, in English and in French. The vocabulary is restricted to the presentation of the methods most currently used in gas analysis. Alphabetical indexes in english and french languages are also given.
