Rechercher

Defines the principles and the technique of the tests designed to determine the conventional mechanical characteristics of assemblies produced with soft solders and brazing filler metals. Specifies also a method of interpreting the results obtained. Applies to joining materials and their fluxes which are used for soldering and brazing of ferrous and non-ferrous metals and alloys.

Seamed fabric specimens are subjected to procedures simulating domestic laundering practices. One of the washing and drying procedures specified in ISO 6330 shall be used. The specimens are compared visually with photographic standards under defined illumination.

Defines diagnostic provisions applicable to electronic systems in road vehicles. Applies to electronic systems including electronic modules, associated input sensors, output actuators and indicators. The measurement ranges specified exclude certain devices for which specific test equipment is required. Does not apply to those systems which have built-in diagnostic capabilities and do not require…

Describes the characteristics of 130 mm (5.25 in) flexible disk cartridges recorded at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides using modified frequency modulation recording. Defines the quality of the recorded signals, the track layout (track format A) to be used on such a flexible disk cartridge intended for data exchange between data processing systems. Applicable in conjunction with ISO…

Describes the characteristics of 130 mm (5.25 in) flexible disk cartridges recorded at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides using modified frequency modulation recording. Defines the quality of the recorded signals, the track layout (track format A) to be used on such a flexible disk cartridge intended for data exchange between data processing systems. Applicable in conjunction with ISO…

Lays down mechanical, physical and magnetic characteristics of a lubricated magnetic disk, having a 200 mm (7.9 in) outer diameter and 63.5 mm (2,5 in) inner diameter, intended for mounting in data storage devices. Defines the requirements for a disk to give satisfactory performance at 95 840 flux transitions per track. When used at other densities, equivalent performance may require…

Lays down mechanical, physical and magnetic characteristics of a lubricated magnetic disk, having a 200 mm (7.9 in) outer diameter and 63.5 mm (2,5 in) inner diameter, intended for mounting in data storage devices. Defines the requirements for a disk to give satisfactory performance at 95 840 flux transitions per track. When used at other densities, equivalent performance may require…

Establishes the dimensions of couplings mounted on commercial vehicles, such as hydraulic pumps, etc. Applies to ancillary equipment of commercial vehicles that require a hydraulic or mechanical power system and that take power of the main drive line of the vehicle. Defines two types of couplings: type A - indirect coupling; type B - direct coupling.

Defines terms for quantities used as input to, and output from, computer programs for shipbuilding. Establishes terminology and definitions also for derived non-dimensional coefficients used in describing ships' hulls and their hydrostatic conditions.

Defines symbols to be used in information processing documentation and gives guidance on conventions tor their use in data flowcharts, program flowcharts, system flowcharts, program network charts, system resources charts. Applicable in conjunction with ISO 2382/1.