Rechercher

Two methods for the measurement are specified: Method A (Ball displacement method): Determination of the viscosity of a pitch at a given temperature determined using a sample of pitch having similar characteristics by measurement of the time a ball, drawn by a defined force, requires to traverse a fixed distance within a measuring tube filled with the sample of molten pitch. Method B (Rotation of…

This part of ISO 3134 defines terms relating to castings (to sand casting, permanent mould casting, pressure die casting and centrifugal casting).

This part of ISO 3134 defines relating to materials special terms to aluminium and aluminium alloys and general terms such as alloy, alloying element, impurity, wrought alloy, casting alloy, master alloy, heat-treatable alloy etc. Magnesium and magnesium alloys will be classified to a later time.

This part of ISO 3134 defines following terms: unwrought product, ingot for rolling, ingot for extruding, ingot for forging, ingot for remelting.

Specifies mechanical, physical and magnetic characteristics of a lubricated disk of 130 mm (5,12 in) outer diameter and 40 mm (1,57 in) inner diameter to be mounted on data storage devices. Defines requirements for proper performance at 83 332 flux transition per track.

Specifies the minimum clear space to be provided beneath the aircraft main jacking points. Is not intended to define fully all jack clearance deminsions. In situations where clearances are critical, it should be used as a design aid only. Final critical clearances should be established by using actual jack dimensions.

Lays down the mechanical, physical and magnetic characteristics for a lubricated magnetic disk of 210 mm (8.3 in) outer diameter and 100 mm (3.9) inner diameter intended for data storage devices. Defines requirements for a disk to enable satisfactory performance at 158 368 flux transitions per track. Other densities may necessitate modified characteristics.

Specifies mechanical, physical and magnetic characteristics of a lubricated disk of 130 mm (5,12 in) outer diameter and 40 mm (1,57 in) inner diameter to be mounted on data storage devices. Defines requirements for proper performance at 83 332 flux transition per track.

Lays down the mechanical, physical and magnetic characteristics for a lubricated magnetic disk of 210 mm (8.3 in) outer diameter and 100 mm (3.9) inner diameter intended for data storage devices. Defines requirements for a disk to enable satisfactory performance at 158 368 flux transitions per track. Other densities may necessitate modified characteristics.

Defines sizes for components of kitchen equipment in dwellings. Specifies also, in annex A, the sizes of zones for hot and cold water and waste and gas pipes in kitchen cabinets and certain appliances. Applies to all components of kitchen equipment, for example cabinets, work-tops, sink units and appliances.