Rechercher

Defines an alternative to the method specified in ISO 2605-1 and ISO 2605-2. Does not define a verification procedure; where verification of elevated temperature properties is required this shall be by hot testing.

Lists the characteristics, ratings and also the inspection requirements for magnetic oxide cores of assessed quality forming a substantially closed magnetic circuit intended for broad-band transformers for professional and industrial applications, excluding power and tuned transformers. Defines the appropriate methods of test to be used in detail specifications derived from this specification, in…

The dimensions specified are close to average dimensions of current production in most manufactering countries. The types of beakers are specified: a low-form beaker with spout an a tall-form beaker with spout. The nominal capacities, the material and the construction are described. The basic dimensions are tabulated and the incriptions are defined.

Specifies a laboratory mechanical method of test for the determination of the relationship between tangential loading and relative displacement for certain types of vertical joints between large reinforced concrete panels subjected to tangential loading. Is applicable to vertical joints between large wall-panels satisfying certain conditions defined in the standard.

Gives a method for evaluating the effectiveness against defined explosions in an enclosed volume. Gives the criteria for alternative test apparatus used to undertake tests and criteria to be applied in defining the safe operating regime.

Defines the main dimensions of the concerning parts of rigging screws for stainless steel wire rope, to ensure the compatibility, assembly and interchangeability of the various parts of standing rigging and attachments of yachts.

Defines terms for the specification of important characteristics of alpine and cross-country skis (XC-skis). An annex gives the equivalent terms in German (only the terms and definitions given in the official languages can be considered as ISO-terms and definitions).

This part of ISO 6305 defines the specifications regarding product quality and the conditions of acceptance for nuts and bolts. Gives manufacturing and acceptance conditions, data to be supplied by the purchaser and packaging. Annexes A to D contain progressive sampling plans.

ISO5414-1 was first publisded in 1982. This second edition cancels and replaces the first edition. Lays down dimensions of the driving system and also the maximum diameter of the chuck nose. Defines two types of drive (chucks for driving parallel shank tools with a single flat or with a double flat).

This second edition cancels and replaces the first edition (1980). Specifies the nature, the method of application, the surface condition and the minimum thickness of internal linings for pipes as defined in ISO 2531 and ISO 7186. Tabulates nominal sizes from DN 40 up to and including DN 2600.