Rechercher

This National Standard of Canada is equivalent to International Standard ISo 4335-1987. 1 Scope and field of application This International Standard specifies elements of data link control procedures for synchronous, code-transparent data transmission using the HDLC frame structure specified in ISO 3309 and independent frame numbering in both directions. These HDLC elements of…

This National Standard of Canada is equivalent to International Standard ISo 7809-1984. 1 Scope and field of application This International Standard describes the HDLC unbalanced classes of procedures and the HDLC balanced class of procedures for synchronous data transmission. Balanced operation is intended for use in circumstances which require equal control at either end of the data…

This National Standard of Canada is equivalent to International Standard ISo 8885-1987. 1. Scope and field of application The principal use of the XID frame is to exchange data link information between two or more HDLC stations. For the purpose of this International Standard, data link information shall include any and all essential operational characteristics such as identification…

This Technical Report specifies a method for determining transient response behaviour at approximately constant speed. The quasi-open-loop manoeuvre used in this method is not representative of real driving conditions but is useful in obtaining measures of vehicle transient behaviour in terms that will be enable the response to any deterministic input to be calculated. Applies to passenger cars…

Defines terms relating to diagnostic systems in English and French. This third edition cancels and replaces the second edition (1984), subclause 2.6.5 of which has been technically revised as follows: "diagnostic tester: Non-built-in equipment with diagnostic capability. Such non-built-in equipment may be used in the vehicle."

These tests shall be carried out on a hard, flat and horizontal plane. The surface of the plane shall have a coefficient of friction as defined in ISO 7176-13.

Provides suitable methods of checking the solvent consumption, the efficiency of solvent recovery during drying, and the solvent concentrations in the atmosphere surrounding the cited machines. Safety requirements concerning the industrial use of these machines are not included.

Deals with iconic documents defined to reflect the needs of the trades and institutions which handle various types of pictures with any claim to being works of art. The list of terms is intended for use in such activities as buying and selling, collecting, cataloguing and filing, exhibiting and lending pictures. The range is limited to those terms most commonly used in galleries and collections,…

Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. Establishes a classification according to surface quality or imperfections and surface finish. A test method for the determination of surface roughness is also described. - Part 1 of this standard deals with the requirements for hardness, part 3 with dimensional tolerances. -…

Defines terms relating to the masses of mopeds and motorcycles, but does not deal with methods of measurement, nor with the units used in reporting the results, nor with the accuracy required or with the order of magnitude of the masses defined. Applies to mopeds and motorcycles as defined in ISO 3833. This second edition cancels and replaces the first edition (1980).