Liquid flow measurement in open channels — Rotating element current-meters
Specifies the operational requirements, construction, calibration, and maintenance of rotating element devices for the measurement of flow velocities in open channels. Does not define the form of the signal produced by the equipment or the signal receiving equipment. Cancels and replaces the second edition (ISO 2537 : 1985), of which it constitutes a technical revision.
1. Scope and Field of Application
This Standard is an Application Layer Standard within the Open Systems
Interconnection framework defined by CSA Standard CAN/CSA-Z243.100.
This Standard defines the services for interlibrary loan. These services are
provided by the use of the ILL protocol in conjunction with supporting
telecommunications services.
This Standard does not specify…
1. Introduction
This document provides a protocol specification for Interlibrary Loan (ILL)
communication. The purpose of the ILL protocol is to allow the parties
involved in an ILL transaction to progress through the transaction in an
orderly and prescribed way.
The ILL protocol is defined as being within the Application Layer (Layer 7) of
the OSI Reference Model (CAN/CSA-Z243.100-86…
Defines in English and French 135 terms of structure, operating conditions, dimensions and geometry of the rollers, surface characteristics of plane and grooved rollers and balance. Alphabetical indices in English and French.
Base materials for printed circuits. Part 2: Specifications. Specification No. 14: Phenolic cellulos...
Gives requirements for properties of phenolic cellulose paper copper-clad laminated sheet, of defined flammability, in thicknesses of 0.5 mm up to 3.2 mm. The sheet consists of an insulating base (phenolic resin bonded cellulose paper laminate with defined flame resistance) with metal foil bonded on one or both sides.
Road vehicles — Transient open-loop response test method with one period of sinusoidal input
This Technical Report specifies a method for determining transient response behaviour at approximately constant speed. It is not fully representative of real driving conditions but similar to lane change manoeuvres in real traffic. Applies to passenger cars as defined in ISO 3833. In a simplified form this test method is also specified in ISO 7401 together with alternative and complementary…
Textile Test Methods Burning Behaviour Selection of Methods
Describes the burning behaviour tests from the CAN/CGSB-4.2 No.
27-M Series and recommends which should be used to determine the
burning behaviour of different products under various defined
conditions.
Road vehicles — Lateral transient response test methods
Specifies test methods to determine transient response behaviour. Applies to passenger cars as defined in ISO 3833. The measurement of steady-state properties is defined in ISO 4138. Annex A contains general data presentation; annex B gives the presentation of results. Some figures show diagrams to be reported.
Audiovisual, video and television equipment and systems. Part 20: Methods of measuring and reporting...
Applies to 16 mm motion picture film projectors for 16 mm films for general application. Defines characteristics affecting the performance of 16 mm projectors related to picture quality and to the quality of sound recorded on and reproduced from photographic and magnetic sound tracks. Specifies methods of measurement of those characteristics, and the conditions under which such measurements shall…
Information processing — Volume and file structure of CD-ROM for information interchange
Specifies the volume and file structure of compact read-only optical disks (CD-ROM) for the information interchange between information processing systems. Defines: the attributes of the volume and the descriptors recorded on it; the relationship among volumes of a volume set; the placement of files; the attributes of the files; recorded structures intended for input or output data streams of an…
