Rechercher

This part specifies the codification system to be used for communication purposes. Defines functions of valve operators used on the various sizes of mounting surfaces complying with the requirements of ISO 5599-1. This codification system is not to be applied directly to the product as is does not describe the many attributes which affect performance interchangeability.

1. Scope 1.1 This Standard applies to cords and cord sets intended for indoor use to electrically connect communication systems that have a normal operating voltage to ground of less than 150 V rms, and that are installed or used in accordance with the Rules of the Canadian Electrical Code, Part I. 1.2 This Standard applies to single, paired, and multiconductor cords, as well as cord…

Applies to magnetic recording of one digital video and four digital audio signals using 19 mm tape cassettes. Is valid for TV signals in digital component form, generated according to the rules of CCIR Recommendations 601 and 656 and for digital audio signals according to IEC 60958. Also describes the digital recording of ancillary data and the analogue recording of one cue track and the control…

This part of ISO 105 describes Test No. 4 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under defined conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.

This part of ISO 105 describes Test No. 5 of a series of five washing tests. A specimen of the textile, in contact with one or two specified adjacent fabrics, is mechanically agitated under defined conditions of time and temperature in a soap solution, then rinsed and dried. The change in colour of the specimen and the staining of the adjacent fabric(s) are assessed with the grey scales.

Establishes a consistent, repeatable means of evaluating characteristics of protective structures under loading. Applies to mobile or self-propelled specially-designed machines as defined in ISO 6814. Some figures illustrate the drop test objekt and drop test impact points. Annex A gives a standard test report; annex B contains additional information for originator of test request.

Specifies the general technical requirements to be met by pliers and nippers for electronics. They are intended for use on electronic components, printed circuit boards, etc. Certain terms are defined in ISO 5742. ISO 9657 does not apply to tools intended for working on live electrical circuits and for antistatic applications.

Establishes working principles for manual control of levelling devices, as defined in ISO 7227, for headlamp dipped beams for road vehicles. Some figures illustrate examples of use of symbols. Gives general specifications, for example: manual levelling devices shall be operable from the driving seat.

This part specifies rules for the use of symbols in basic logic systems needed for better understanding of pipe connections. This system may be used to define functions as well as for diagram circuitry. The rules specified in this part are applicable to any type of fluid power binary logic device, with or without moving parts.