Tractors, machinery for agriculture and forestry, powered lawn and garden
equipment - Symbols for o...
1 Scope
This part of ISO 3767 establishes the common symbols for use on operator
controls and other displays on tractors and machinery for agriculture and
forestry, and powered lawn and garden equipment as defined in ISO 3339-0 and
ISO 5395.
The symbols given apply to controls and displays common to tractors and
machinery for agriculture and forestry, and powered lawn and garden…
1. Scope
1.1
This Standard outlines a means for certifying eligible welding inspectors by
examination in one of three levels. It describes the responsibilities
associated with each level and the basic technical functions of welding
inspectors. This Standard also outlines a means of registering welding
inspection trainees.
1.2
The certification document shall indicate the codes,…
Determining the Required Capacity of Residential Space Heating and Cooling Appliances
1. Scope
1.1
This Standard provides a calculation method for determining the output capacity
of a residential space heating appliance or group of appliances, and the output
capacity of a residential cooling appliance or group of appliances required to
maintain specified indoor environmental conditions under specified outdoor
environmental conditions.
1.2
This Standard also provides restrictions…
Rules for steam turbine thermal acceptance tests. Part 1: Method A - High accuracy for large condens...
Specifies very accurate testing of steam turbines to obtain the level of performance with minimum measuring uncertainty. Defines uniform rules for preparing and carrying out an evaluation of the acceptance tests. Defines also the conditions under which the acceptance tests shall take place. The cost for conducting this test method will generally be justified economically for large and/or…
Classification of environmental conditions - Part 1: Environmental parameters and their severities
Defines environmental parameters and a limited number of their severities within the range of conditions met by electrotechnical products when being transported, stored, installed and used.
A.C. metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including...
This publication completes IEC 60694 as regards a.c. metal-enclosed switchgear and controlgear and applies also to gas-filled compartments used in metal-enclosed switchgear and controlgear. Defines service conditions, applicable terms and rated characteristics. Specifies rules for design and construction and rules for type tests and routine tests. Also provides general information on the…
Measurement of smoke density of electric cables burning under defined conditions - Part 1: Test appa...
Provides details of the test apparatus to be used for measuring
smoke emission when electric cables are burned under defined
conditions.
Has the status of a technical report.
Cellular plastics, rigid — Test methods for self-skinned, high-density materials
Contains the basic test procedures for the determination of the physical properties of these plastics. Also specifies the primary methods to be used for comparison of materials similar to materials as defined in clause 3. Likewise permits the use of the same test methods, when found to be suitable for the assessment of the properties of products of different thickness, when agreed upon by the…
Rotary shaft lip type seals — Part 5: Identification of visual imperfections
This part shows and identifies visual imperfections on typical rotary shaft lip type seals, dimensionally standardized in ISO 6194-1, as a convenience for purchasers and manufacturers in their discussions about the importance of imperfections in different applications. It defines and classifies typical surface imperfections that often impair the function of the rotary shaft lip type seal.
Information technology — Open Systems Interconnection — Specification of Basic Encoding Rules for Ab...
Specifies a set of basic encoding rules that may be used to derive the specification of a transfer syntax for values of types defined using the notation specified in ISO/IEC 8824. These basic encoding rules are used at the time of communication (by the presentation service provider when required by a presentation context). Annex A gives an example of encodings, Annex B indicates the assignment of…