Rechercher

1. Scope 1.1 Except as provided for in Clause 1.2, this Standard applies to all boilers, pressure vessels, fittings, and piping, as provided for by the Act and defined in this Standard. Notes: (1) In certain provinces there may be variations in size limitations quoted in this Standard. Consultation with the regulatory authority is recommended. (2) Cylinders, spheres, tubes, and drums…

1. Scope 1.1 This Standard sets out minimum requirements for serially produced light-weight refillable gas cylinders, original equipment and conversions, having a water capacity exceeding 20 L (1220 in³) but not exceeding 1000 L (35.3 ft³). The cylinders are intended only for the on-board storage of high pressure compressed natural gas as a fuel for automotive vehicles to which the…

1. Scope 1.1 General 1.1.1 Except as provided for in Clause 1.1.2, this Standard applies to the design, construction, installation, operation, and inspection of every refrigerating system, as provided for by the Act and defined in this Code. 1.1.2 This Standard does not apply to the use of water or air as a refrigerant, nor to bulk-storage gas tanks that are not permanently…

1.1 Scope 1.1.1 This standard applies to newly produced food service gas ranges and unit broilers (see Part IV, Definitions) hereinafter referred to as appliances, constructed entirely of new, unused parts and materials for use in food service centers of commercial, industrial, institutional and public assembly buildings: a. For use with natural gas; b. For use with…

1.1 Scope 1.1.1 This standard applies to newly produced food service deep fat fryers (see Part IV, Definitions) hereinafter referred to as fryers, constructed entirely of new, unused parts and materials for use in food service centers of commercial, industrial, institutional and public assembly buildings: a. for use with natural gas; b. for use with manufactured gas…

1.1 Scope 1.1.1 This Standard applies to newly produced counter appliances (counter or floor-mounted) (see Part VI, Definitions) hereinafter referred to as appliances, constructed entirely of new, unused parts and materials for use in food service centers of commercial, industrial, institutional and public assembly buildings. a. For use with natural gas; b. For use…

Specifies the diameters of the flexible metal hoses in accordance with ISO 7657 and tested in accordance with ISO 7658 without external coating (as defined in ISO 7369:1983, 4.1.10), used under low pressure, with permissible leakage, at temperatures between - 20 °C and a maximum of 230 °C. The packing should not be asbestos. Suitable materials include cotton, fibre-glass, nylon, Kevlar, polyamide…

Defines the conditions (materials, performance characteristics, temperature-related requirements) to be met for the flexible metal hoses, without coating (as defined in ISO 7369:1983, 4.1.10). The metal hoses defined are manufactured from helically wound preformed strip, generally with a right-hand lead where the turns, with or without packing, are connected together by single or double…

Defines profile RD51.51, gives static conformance requirements, dynamic conformance requirements and, in annex A, a list of ISPICS requirements. Is applicable to interworking units concerned with operating in the open systems interconnection (OSI) local area network environment between CSMA/CD LAN subnetworks.

Establishes general principles for the design and application of safety signs and hazard pictorials permanently affixed to tractors, machinery for agriculture and forestry, and powered lawn and garden equipment as defined in ISO 3339-0 and ISO 5395. Outlines safety sign objectives, describes the basic safety sign formats and colours, and provides guidance on developing the various panels that…