Magnetic materials - Part 8-4: Specifications for individual materials - Cold-rolled non-oriented el...
Defines the grades of cold-rolled non-oriented electrical steel sheet and strip in nominal thicknesses of 0.35 mm, 0.50 mm, 0.65 mm and 1,00 mm. Specifies general requirements, the magnetic properties, geometric characteristics and tolerances, and technological characteristics, as well as the inspection procedure.
Applies to materials supplied in the fully annealed condition intended for the…
Magnetic materials - Part 8-7: Specifications for individual materials - Cold-rolled grain-oriented ...
Defines the grades of grain-oriented electrical steel sheet in nominal thicknesses of 0,23 mm, 0.27 mm, 0.30 mm and 0.35 mm. Gives general requirements, magnetic properties, geometric characteristics and tolerances, and technological characteristics, as well as inspection procedures. Applies to Goss textured grain-oriented electrical steel sheet supplied in the final annealed condition in sheets…
Magnetic materials - Part 8-3: Specifications for individual materials - Cold-rolled electrical non-...
Defines the grades of cold-rolled electrical non-oriented non-alloyed steel strip delivered in the semi-processed condition, that is without final heat treatment, of 0.50 mm and 0.65 mm nominal thickness. Specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure. Applies to material…
Magnetic materials - Part 8-2: Specifications for individual materials - Cold-rolled electrical allo...
Defines the grades of cold-rolled electrical non-oriented alloyed steel sheet and strip delivered in the semi-processed condition, that is without final heat treatment, of 0.50 mm and 0.65 mm nominal thickness. It specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure.
Applies to…
Printed boards and printed board assemblies - Design and use - Part 1-2: Generic requirements - Cont...
The aim in packaging is to transfer a signal from one device to one or more other devices through a conductor. High-speed designs are defined as designs in which the interconnecting properties affect circuit performance and require unique considerations.
Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requ...
Specifies requirements for group II (as defined in part 1) portable, transportable and fixed apparatus for the detectino and measurement of combustible gas or vapour concentrations with air. The apparatus, or parts thereof, may be installed or used in potentially explosive atmospheres, other than mines susceptible to firedamp (i.e. group I).
This standard is restricted to apparatus intended for…
Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requ...
Specifies requirements for group II (as defined in part 1) portable, transportable and fixed apparatus for the detection and measurement of combustible gas or vapour concentrations with air. The apparatus, or parts thereof, may be installed or used in potentially explosive atmospheres, other than mines susceptible to firedamp (i.e. group I).
This standard is restricted to apparatus intended for…
Liquid crystal and solid-state display devices - Part 1: Generic specification
Defines general procedures for quality assessment to be used in the IECQ system and gives general rules for measuring methods of electrical and optical characteristics, rules for climatic and mechanical tests, and rules for endurance tests.
Medical electrical equipment - Digital imaging and communications in medicine (DICOM) - Radiotherapy...
This report is supplement 11 to the DICOM standard. It defines a number of information objects applicable to the domain of radiation oncology. The intent of these objects is to support the transfer of radiotherapy-related data between devices found within and outside a radiotherapy department.
Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requ...
Specifies requirements for group I (as defined in part 1) portable, transportable and fixed apparatus for the detection and measurement of methane concentrations in mine air. The apparatus, or parts thereof, are intended for use in mines susceptible to firedamp. The requirements and test methods applicable to the apparatus covered by this standard are specified in part 1.
This standard is…