Rechercher

This International Standard provides parameters based on values for hand/arm and approach speeds and the methodology to determine the minimum distances from sensing or actuating devices of protective equipment to a danger zone. These specific devices are: trip devices as defined in EN 292-1:1991, 3.23.5 (specifically electro-sensitive protective equipment, pressure sensitive mats), including…

Covers 8-way connectors up to 4 pairs to be used up to 600 MHz, when used with an appropriate cable. These cables are specified in IEC 61156. The connectors are compatible with those already defined in IEC 60603-7-7.

Applies to substation automation systems and more specifically defines the communication between intelligent electronic devices in the substation and the related system requirements. This publication is of core relevance for Smart Grid.

1. SCOPE 1.1 Organization and Content - This standard sets out the requirements for the design and manufacture of Intermediate Bulk Containers (IBCs) with a capacity equal to or less than 3000 L and their use for the transportation of Class 3, 4, 5, 8 or 9 or Division 6.1 dangerous goods. This standard consists of two parts and three appendices. Part 1 contains the requirements for the design…

1. Scope 1.1 This Standard covers requirements for visible signal devices for use in accordance with the Standard for the Installation of Fire alarm Systems, CAN/ULC-S524, and in accordance with C22.1, Canadian Electrical Code, Part I. 1.2 These requirements cover visible signal devices for use in ordinary (non-hazardous) indoor locations and outdoor locations. 1.3 Visual signal…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-34:2000, (second edition, 2000-10). Scope and object This clause of the General Standard applies except as follows: * 1.1 Scope Addition: This Particular Standard applies to INVASIVE BLOOD PRESSURE MONITORING and measuring EQUIPMENT as defined in 2.101, hereinafter referred to as EQUIPMENT. This Particular…

The VMEbus specification defines an interfacing system used to interconnect microprocessors, data storage and peripheral control devices in a closely-coupled hardware configuration. Its objectives include allowing communication between devices on the VMEbus without disturbing the internal activities of other devices on the VMEbus, allowing a broad range of design latitude so that the designer can…

This part of ISO/TR 11548 specifies short identifiers for 8-dot Braille patterns in addition to the names specified in ISO/IEC 10646-1:2000. As there are many different code tables in use dealing with various character sets (e.g. Arabic, Chinese, Japanese, Latin) and for special purposes (e.g. chemistry, mathematics and music notation), this part of ISO/TR 11548-1 also defines a method of…

This part of ISO/IEC 14776 defines a protocol for the transport of commands and data over High Performance Serial Bus. The transport protocol, Serial Bus Protocol 2 or SBP-2, requires implementations to conform to the requirements of this standard as well as to ISO/IEC 13213:1994 and permits the exchange of commands, data and status between initiators and targets connected to Serial Bus.

This part of ISO/IEC 9314 contains the abstract test suite for the Fibre Distributed Data Interface (FDDI) token ring Media Access Control (MAC) layer protocol. This test suite was developed based on the principles defined in OSI Conformance Testing Methodology and Framework (ISO/IEC 9646) and written in Tree and Tabular Combined Notation (TTCN), and intended for testing conformance to the MAC…