1 Scope
1.1
This Standard covers plumbing fittings, including the following:
a)
automatic compensating valves other than those for individual wall-mounted showering systems;
b)
solenoid valves;
c)
temperature-actuated in-line mixing valves;
d)
thermal expansion relief valves; and
e)
trap primers.
1.2
This Standard does not cover the following plumbing supply fittings and accessories…
Water pressure reducing valves for potable water distribution systems
1 Scope
1.1 General
This Standard applies to self-acting spring-operated devices that automatically reduce the initial pressure in water systems to a set lower pressure. It applies to devices that are of the direct-acting diaphragm type with a means for adjusting the pressure setting. Valves can be with or without an integral bypass relief valve or strainer.
1.2 Sizes
This Standard applies to…
Manually or automatically operated valves for use in plumbing systems
1 Scope
1.1 Inclusions
This Standard specifies requirements for manually or automatically operated valves, in sizes NPS 4 and smaller. Valves covered by this Standard are intended for installation as water shutoff valves between the meter and the supply stop.
Note: Manually or automatically operated valves covered by this Standard are also known as supply line stops.
1.2
This Standard does…
1 Scope
1.1
This Standard covers plumbing fixtures made of stainless steel alloys and specifies requirements for materials, construction, performance, testing, and markings.
Note: The term “corrosion-resisting steel” is also applied to stainless steel.
1.2
This Standard covers the following plumbing fixtures:
a)
bathtubs;
b)
bidets;
c)
drinking fountains and water coolers;
d)…
Flush valves and spuds for water closets, urinals, and tanks
1 Scope
1.1
This Standard covers spuds and flush valves for water closet bowls, tanks, and urinals.
1.2
The provisions of this Standard are not intended to prevent the use of alternative materials or methods of construction or design, provided any such alternative meets the performance criteria outlined herein.
1.3
In this Standard, “shall” is used to express a requirement, i.e., a…
1 Scope
1.1
This Standard describes the methods for determining the level of depressurization and solutions to mitigate risk arising from depressurization.
1.2
This Standard applies to detached, semi-detached, and row houses equipped with an exhaust device(s). It also applies to houses with secondary suites equipped with a separate exhaust device(s).
1.3
This Standard does not address…
Electromagnetic compatibility (EMC) — Part 4-9: Testing and measurement techniques — Impulse magneti...
1 Scope and object
This part of IEC 61000 specifies the immunity requirements, test methods, and range of
recommended test levels for equipment subjected to impulse magnetic disturbances mainly
encountered in:
– industrial installations,
– power plants,
– railway installations,
– medium voltage and high voltage sub-stations.
The applicability of this standard to equipment installed in…
Medical gas pipeline systems — Part 1: Pipelines for medical gases, medical vacuum, medical support ...
1 Scope
1.1 General
This Standard specifies safety requirements for pipelines for medical gases, medical vacuum, medical
support gases, and anaesthetic gas scavenging systems in health care facilities, both public and private.
It applies to all facilities providing health care services, regardless of type, size, location, or range of
services, including, but not limited to
a) acute care…
Industrial systems, installations and equipment and industrial products — Structuring principles and...
This document provides rules for structuring of systems in the domain of power supply systems, being supplementary to the general principles for the structuring of systems including structuring of information about systems specified in IEC 81346-1.
Based on these principles, rules and guidance are given for the formulation of unambiguous reference designations for objects in any system.
The…
Agricultural sprayers — Recording of spray drift parameters
This document defines requirements on the electronic measurements (during spray operation) and recording of operator-controlled application parameters that influence spray drift, when specified for certain drift reduction technologies (DRT).
The values measured and recorded can be used to compare the setting of the sprayer with the provisions authorized for the specific DRT.
The document is…