Rechercher

IEC 61753-021-06:2023 defines the minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorised as meeting the IEC standard category OP+ (extended outdoor protected environment), as defined in IEC 61753-1. If tests were performed on the connectors terminated as pigtails or…

IEC 61753-021-02:2023 defines the minimum initial test and measurement requirements and severities which single-mode fibre optic connectors terminated as a pigtail or a patchcord satisfy in order to be categorized as meeting the IEC standard category C (controlled environment), as defined in IEC 61753-1. If tests were performed on the connectors terminated as pigtails or patchcords for categories…

This document specifies the basic and design profiles for ISO inch screw threads (UN and UNR). UN applies to both internal and external threads. UNR only applies to external threads. A flat or rounded root contour, due to the threading process, is specified for UN threads, while only a defined rounded root contour is specified for UNR external threads. This document is applicable to the inch…

This document describes the technology for simulating space environments such as vacuum, cold black, and heat flux, as well as the compositions and functions of a thermal vacuum chamber (TVC). This kind of facility defined in this document is suitable for thermal vacuum tests (TVT) and thermal balance tests (TBT) on spacecraft-system level as well as on large-spacecraft-component level.

IEC 60704-2-13:2023 applies to cooking fume extractors for household and similar use intended for filtering the air of a room or for exhausting the air out of a room, including their accessories and their component parts. It also applies to cooking fume extractors where the fan is mounted separately from the appliance inside or outside of the room where the appliance is located, but controlled by…

1 Scope 1.1 This Standard specifies construction and testing requirements for portable power cables normally used in applications where the cables are subject to frequent flexing and where installation is in accordance with CSA M421 and/or the Canadian Electrical Code, Part I, where applicable. 1.2 The cable constructions specified in Clauses 5to 9and Clauses 12to 16of this Standard are…

This document specifies direction for the design of the physical interface between a supply system and a consumer system. Electrical, geometrical and test requirements are defined within this document.

IEC 60512-99-003:2023 is used for the assessment of connectors within the scope of SC 48B that are used in balanced single-pair communication cabling with remote power, in support of e.g., IEEE 802.3 remote powering applications for point-to-point connections. The object of this document is to detail a test schedule to determine the ability of sets of single-pair connectors as defined in the IEC…

IEC TS 63291-2:2023 defines aspects on planning, specification, and execution of multi-vendor HVDC grid systems also referred to as HVDC grids. The terms "HVDC grid systems" or "HVDC grids" are used in this document to describe HVDC systems for power transmission having more than two HVDC stations connected to a common DC circuit. The DC circuit can be of radial or meshed…

IEC 62056-6-2:2023 specifies a model of a meter as it is seen through its communication interface(s). Generic building blocks are defined using object-oriented methods, in the form of interface classes to model meters from simple up to very complex functionality. Annexes A to F (informative) provide additional information related to some interface classes This fourth edition cancels and…