Road vehicles — Local Interconnect Network (LIN) — Part 7: Electrical Physical Layer (EPL) conforman...
ISO 17987-7:2016 specifies the conformance test for the electrical physical layer (EPL) of the LIN communications system. It is part of this document to define a test that considers ISO 9646 and ISO 17987‑4.
The purpose of ISO 17987-7:2016 is to provide a standardized way to verify whether a LIN bus driver is compliant to ISO 17987?4. The primary motivation is to ensure a level of…
Road vehicles — Local Interconnect Network (LIN) — Part 6: Protocol conformance test specification
ISO 17987-6:2016 specifies the LIN protocol conformance test. This test verifies the conformance of LIN communication controllers with respect to ISO 17987‑2 and ISO 17987‑3.
ISO 17987-6:2016 provides all necessary technical information to ensure that test results are identical even on different test systems, provided that the particular test suite and the test system are compliant to the content…
Preparation of steel substrates before application of paints and related products — Specifications f...
This document specifies requirements for lava abrasives, as supplied for blast-cleaning processes. It specifies ranges of particle sizes and values for apparent density, Mohs hardness, moisture content, conductivity of aqueous extract and water-soluble chlorides.
The requirements specified in this document apply to abrasives supplied in the "new" condition only. They do not apply to…
Liquid petroleum products — Determination of hydrocarbon types and oxygenates in automotive-motor ga...
This document specifies the gas chromatographic (GC) method for the determination of saturated, olefinic and aromatic hydrocarbons in automotive motor gasoline and ethanol (E85) automotive fuel. Additionally, the benzene and toluene content, oxygenated compounds and the total oxygen content can be determined.
NOTE 1 For the purposes of this document, the terms % (m/m) and % (V/V) are used to…
Rapid detection of moisture content in fresh meat — Low-field NMR method
This document specifies the technical requirements for rapid determination of moisture of fresh meat based on low-field nuclear magnetic resonance (LF-NMR) technology.
The test method specified in this document is applicable to the rapid detection of moisture in fresh meat, water-injected meat or thawed meat.
Industrial automation systems and integration — JT file format specification for 3D visualization — ...
The JT file format specification for 3D visualization specifies the sequential order of bytes that comprise the segments of data required to represent an ISO 14306 file. The JT format is uniquely compressed to minimize file size.
The JT file format specification for 3D visualization includes data descriptions that can represent the following data.
— facet information (triangles), stored with…
Intelligent transport systems — Field device Simple Network Management Protocol (SNMP) data interfac...
Field devices are a key component in intelligent transport systems (ITS). Field devices include traffic signals, message signs, weather stations, traffic sensors, roadside equipment for connected ITS environments, etc.
The ISO 26048 series defines data that can be used to manage field devices, including device configuration, control, and monitoring. Field devices can be quite complex,…
Financial services — Personal Identification Number (PIN) management and security — Part 5: Methods ...
The purpose of the proposed standard is to provide requirements and guidance for methods for generation, change, and verification of PINs using 16-byte block ciphers such as AES.
Outline
The following table of contents expresses the intended direction of the work effort, but would be anticipated to change as the work progresses:
Foreword
Introduction
1 Scope
2 Normative References
ISO 13491,…
Drinking water, wastewater and stormwater systems and services — Guidelines for the management of on...
ISO 24521:2016 provides guidance for the management of basic on-site domestic wastewater services, using appropriate technologies in their entirety at any level of development.
ISO 24521:2016 supplements and is intended to be used in conjunction with ISO 24511. It includes the following:
· guidelines for the management of basic on-site domestic wastewater services from the operator's…
Environmental Solid Matrices — Determination of hydrocarbon content in the range of C10 to C40 by ga...
ISO 16703:2004 specifies a method for the quantitative determination of the mineral oil (hydrocarbon) content in field-moist soil samples by gas chromatography.
The method is applicable to mineral oil contents (mass fraction) between 100 mg/kg and 10 000 mg/kg soil, expressed as dry matter, and can be adapted to lower detection limits.
ISO 16703:2004 is applicable to the determination of all…
