Rechercher

This National Standard of Canada is based on International Standard IEC 60598-2-4:1997 Scope This section of Part 2 of IEC Publication 60598 specifies requirements for portable general purpose luminaires, other than handlamps, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 120 V. It is to be read in conjunction with those sections…

This National Standard of Canada is based on International Standard IEC 432-2:1994. 1.1 Scope This part of IEC 432 specifies the safety and the related interchangeability requirements of tungsten halogen lamps for general lighting service. It covers those tungsten halogen lamps that are used as direct replacements for conventional tungsten filament lamps as well as new tungsten halogen…

This National Standard of Canada is based on International Standard CEI/IEC 920:1990 1. Scope This standard covers ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and…

Preface This is the first edition of CSA Special Publication PLUS 9014, ISO 9000 Interpretations. It is a compendium of interpretations given on the ISO 9000 family of Standards and approved by the CSA Technical Committee on Quality Management (TC on QM). The ISO 9000 family of Standards was developed by quality experts from around the world, under the auspices of the Internationa l…

1. SCOPe 1.1 This Standard specifies the requirements and test methods for spray-applied rigid polyurethane cellular plastics used as thermal insulation in buildings and other applications, when applied either "on site" or in a manufacturing facility. 1.2 The spray-applied rigid polyurethane cellular plastic thermal insulation shall not be used when the continuous service…

This National Standard of Canada is equivalent to International Standard ISO 9000-2:1997. 1 Scope This part of ISO 9000 gives guidance on the application of the 1994 versions of ISO 9001, ISO 9002 and ISO 9003. It does not add to, or otherwise change, the requirements of ISO 9001, ISO 9002 or ISO 9003. In the case of conflicting interpretations of ISO 9001, ISO 9002 or ISO 9003 on…

1.1 SCOPE 1.1.1 This standard applies to newly produced vented gas-fired space heating appliances (see Part XIV, Definitions), hereinafter referred to as appliance(s), constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d…

1. Scope 1.1 Classifications and Test Requirements Classification levels and test requirements provided within CSA Standard A440 and this Special Publication allow a purchaser or specifier to select windows suitable to their specific climatic conditions, height of installation, type of building, etc. The authority having jurisdiction assigns the minimum levels to be met. All other…

1. Scope 1.1 This Standard applies to (a) all windows covered by CSA Standard A440, including (i) vertical sliding windows; (ii) horizontal sliding windows; (iii) tilt-and-turn windows; (iv) casement windows, both fixed and operable; (v) projecting (awning/hopper) windows, and (vi) fixed windows, including fixed-window…

1 Scope This clause of part 1 is replaced by: This standard deals with the safety of electric fence energizers, the rated voltage of which is not more than 250 V intended for agricultural use, for control of domestic farm and feral animals. Note 1 - Examples of electric fence energizers coming within the scope of this standard are: - mains-operated…