Rechercher

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 14496-7:2002 (first edition, 2002-12-01). 1 Scope This part of ISO/IEC 14496 specifies the encoding tools that both enhance the execution and quality for the coding of visual objects as defined in the ISO/IEC 14496-2. The tool set is not limited to visual objects but at this point all the recommended…

This National Standard of Canada is based on International Standard ISO 10535:1998, first edition, 1998-10-15, (with Canadian deviations) 1 Scope This European standard specifies requirements and test methods only for hoists and body support units intended for the transfer of disabled persons as classified in EN ISO 9999:1998: 12 36 03 Wheeled hoists with sling seats 12 36 06 Wheeled hoists…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61318:1994. Scope This technical report establishes the guidelines for the plans and procedures, as prepared by TC 78, assuming the quality of tools and equipment used for live working on elctrical installations. This report incorporates the concept of quality assurance based on the ISO 9000 series and also…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-44:2001 (second edition, 2001-06). 1 Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to X-RAY EQUIPMENT for COMPUTED TOMOGRAPHY (CT SCANNERS). It includes safety requirements for the X-RAY GENERATOR, and those where HIGH…

Applies to compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV), e.g. buried cables or cables installed in buildings, having - conductors complying with IEC 60228 and IEC 60228A with cross-sectional areas 10 mm2 and greater for copper and 16 mm2 and greater for aluminium, - a maximum continuous conductor temperature not exceeding 90 °C. This standard…

This National Standard of Canada is based on International Standard CEI/IEC 61558-1:1997 (edition 1.1, 1998-07). 1 Scope 1.1 This International Standard deals with all aspects of safety (such as electrical, thermal and mechanical) of: a) Stationary or portable, single-phase or polyphase, air-cooled (natural or forced) isolating and safety isolating transformers, associated or otherwise, having…

This National Standardof Canada is equivalent to Internationale Standard ISO/TR 14062:2002 (first edition, 2002-11-01). 1 Scope This Technical Report describes concepts and current practices relating to the integration of environmental aspects into product design and development, where .product. is understood to cover both goods and services. This Technical Report is applicable to the…

This National Standard of Canada is equivalent to International Standard ISO/TS 14048:2002 (first edition, 2002-04-01). 1 Scope This Technical Specification provides the requirements and a structure for a data documentation format, to be used for transparent and unambiguous documentation and exchange of Life Cycle Assessment (LCA) and Life Cycle Inventory (LCI) data, thus permitting consistent…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-1:1997 (first edition 1997-02). 1 Scope Replacement: This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled separating transformers, associated or not, having a rated supply voltage not exceeding 1000 V a.c., a rated frequency not exceeding 500 Hz, and a…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-4:1997 (first edition, 1997-02). 1 Scope Replacement: This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, air-cooled isolating transformers, associated or otherwise, having a rated supply voltage not exceeding 1000 V a.c. and rated frequency not exceeding 500 Hz,…