Rechercher

1 Domaine d’application 1.1 Les présentes exigences s'appliquent aux pistolets conçus pour contrôler les liquides inflammables et combustibles. Ces pistolets sont du même type que ceux utilisés dans les appareils de distribution de carburant. Les pistolets visés par la présente norme sont destinés aux liquides inflammables et combustibles utilisés à des températures comprises entre -29 °…

1.1 These requirements cover pressure regulators for use with LP-Gas equipment. NOTE: For the purposes of this standard the terms “LP-Gas” and “Propane” are interchangeable. 1.2 Regulators covered by these requirements are intended to be installed and used in systems in accordance with the applicable Codes and Regulations as determined by the Authority Having Jurisdiction (AHJ), such as, but…

1 Scope 1.1 This Standard outlines requirements for low slope membrane roofing systems (LSMRS) when identified as “silver” and “gold” performance level based on the climate severity and resilience requirements. Note: The National Building Code of Canada and the National Energy Code of Canada for Buildings provides “bronze” requirements for LSMRS. 1.2 This Standard is intended to be used by…

1 Scope 1.1 Introduction 1.1.1 Fire fighters (FF) performing operations involving buildings with attached or integrated Photovoltaic (PV) arrays may be exposed to electrical hazards from damaged PV equipment. These requirements provide a means for evaluation of PV Hazard Control components, equipment and systems that provide a reduced level of shock hazard from energized PV system equipment…

1 Scope 1.1 This National Standard of Canada1 provides additional information to CAN/CGSB-32.310, Organic production systems — General principles and management standards, in the form of permitted substances to be used as annotated in accordance with the scope of the table in which they are listed. Use of a listed substance in a manner inconsistent with the scope of the table in which it…

1 Scope 1.1 This National Standard of Canada applies to the following organic products: a) Unprocessed plants and plant products, livestock and livestock products, to the extent that the principles of production and specific verification rules for them are described in the standard; b) Processed agricultural crop and livestock products intended for human consumption or use and derived from…

This National Standard of Canada sets out the requirements for training, assessment and competency of persons who handle, offer for transport or transport dangerous goods by road, rail, marine and air in Canada. Competency to perform tasks pertaining to the TDG is developed through the acquisition of knowledge, skill, and ability. This standard recognizes that operations vary from organization…

1 Scope and normative references This clause of Part 1 is applicable except as follows: 1.1 Replacement: This part 2-14 applies to electric actuators for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. NOTE Throughout this standard the word "…

1.1 This Standard covers the refurbishing of shop fabricated tanks built to nationally recognized Standards listed in Tank Eligibility, Sections 12 and 18. NOTE: In the context of this Standard, refurbishing refers to repairs to, and a limited set of modifications of, tanks using materials at least equivalent to those used in the original manufacture and does not include retrofit. Refer to…

1.1 These requirements cover valves that are intended to be used for the control of flammable and combustible liquids and their vapors. They are of the type commonly used in piping systems and in the assembly of motor fuel dispensing and fuel burning equipment. Valves covered by this standard are for use with flammable liquids which are handled at temperatures normally within the range of -29°…