Cybersecurity of Industrial Internet of Things (IIoT) Devices
1 Scope
1.1 General
1.1.1 The Standard aims to specify minimum requirements for the design and operation of Industrial
Internet of Things (IIoT) devices to meet requirements for security, safety, confidentiality,
integrity, and availability.
NOTE: As a National Standard of Canada, this is a voluntary standard. It only applies to the
organizations that decide to adopt the Standard and…
BoardBiodiesel (B100) for blending in middle distillate fuels
This National Standard of Canada applies to one grade of biodiesel that is intended for use as a blending component
in middle distillate fuels.
Biodiesel meeting this standard is not intended for use as a fuel in its neat form.
See Annex B for regulations that apply to diesel fuels.
The testing and evaluation of a product against this standard may require the use of materials and/or equipment…
1 Scope
1.1 This standard specifies the requirements for devices intended for positioning, which may include
bundling, routing, locating, and securing of cable, wire, conduit, or tubing used in a wiring system in
electrical installations in accordance with CSA C22.1, Canadian Electrical Code (CE Code), Part I, in
Canada and the National Electrical Code (NEC), NFPA 70 in the United States of…
BoardPolyethylene sheet for use in building construction – Material specification
This National Standard of Canada establishes a classification system and specifies physical property requirements.
Test methods to determine the properties for each class of polyethylene sheet material are specified. This document
covers a material intended to be used in building construction applications, that may be used above grade or in
contact with the ground. The material can provide the…
Household and similar electrical appliances — Safety — Part 2-24: Particular requirements for refrig...
1 Scope
This clause of Part 1 is replaced by the following:
This International Standard deals with the safety of the following appliances, their RATED VOLTAGE being not
more than 250 V for single-phase appliances, 480 V for other appliances and 24 V DC for appliances
when battery operated:
– REFRIGERATING APPLIANCES for household and similar use;
– ICE-MAKERS incorporating a motor-…
STANDARD FOR SINGLE AND MULTIPLE STATION HEAT ALARMS
1.1 These requirements cover heat-actuated, single and multiple station heat alarms intended for indoor
installation in accordance with:
a) In Canada:
1) The National Building Code of Canada,
2) The National Fire Code of Canada,
b) In the United States:
3) The National Fire Alarm and Signaling Code, NFPA 72
1.1 These requirements cover check valves of 1 NPS and larger, used in piping systems supplying water
for fire protection service.
1.2 The check valves covered by these requirements are intended for installation and use in accordance
with the Standards for:
a) Low-, Medium-, and High-Expansion Foam, NFPA 11;
b) Installation of Sprinkler Systems, NFPA 13;
c) Installation of Standpipe and…
Design and construction of low-rise residential and small buildings to resist high wind
1 Scope
1.1 General
This Standard contains best practice guidance for the design and construction of low-rise, wood-frame buildings to withstand high winds corresponding to EF-2 tornado-level wind speeds, assumed to be associated with a reference velocity pressure of 1 kPa. The guidance in this Standard is based on, and written to, supplement the requirements specified in Part 9 of the National…
1 Scope
1.1 General
This standard specifies the requirements for electric vehicle cables rated up to 1000V AC and DC intended
to be part of a cord set carried in the vehicle for connection to a charging station or for permanent or
temporary connection to Electric Vehicle Supply Equipment (EVSE) or for connection to the branch circuit
supplying the EVSE or vice versa for use in accordance…