Rechercher

ISO 13802:2015 specifies frequency and methods for the verification of pendulum impact-testing machines used for the Charpy impact test, Izod impact test, and tensile impact test described in ISO 179‑1, ISO 180, and ISO 8256, respectively. Verification of instrumented impact machines is covered insofar as the geometrical and physical properties of instrumented machines are identical to non…

ISO/IEC 29110 is applicable to Very Small Entities (VSEs). VSEs are enterprises, organizations, departments or projects having up to 25 people. The lifecycle processes described in the set of International Standards (IS) and Technical Reports (TR) are not intended to preclude or discourage their use by organizations bigger than VSEs. ISO/IEC 29110-5-6-2:2014 provides the management and…

This International Standard defines the procedures for noise control of mainly open plants. It is applicable to the following: _ specification of procedures for noise control during engineering of a new plant and modification/extension of existing plants (construction noise procedures are outside the scope of this International Standard but should be considered); _ definition of responsibilities…

Brown coals are classified in this International Standard according to the following properties: total moisture content calculated on the ash-free basis; tar hiels calculated on the dry, ash-free basis. In tables class numbers, group number and code numbers of brown coal types are given.

This International Standard specifies the evaluation methods for ROS in pollutant abatement through FB-facilitated advanced oxidation treatment.

This International Standard specifies the test method to evaluate the assistance/enhancement performance of the lower-limb wearable robots by using an anthropomorphic test dummy robot (ATDR). ATDR wears the lower-limb wearable robot and runs test instead of a human thereby ensuring the objectivity and repeatability of the test. This International Standard is applied to all wearable robots that…

This International standard specifies requirements for dried lime (Citrus aurantifolia – Christm. – Swingle, Citrus latifolia Tanaka, family Rutaceae) in whole, slices and ground form. The term "Dried Lime" includes dehydrated lime by sun and/or artificially dried.  Recommendation relating to storage and transport conditions is given in the annex A.

This international standard specifies the requirements for factory-made rigid nano-microporous insulation, for use in industrial applications. This document specifies insulation that exhibits thermal insulating performance through nano-sized-pore composite material. The material comprises a blend of inorganic powder, fibres and opacifiers. The products are delivered as board or pipe section type…

ISO 2719:2016 describes three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C. CAUTION - For certain mixtures no flash point, as defined, is observed;…

ISO 15382:2015 provides procedures for monitoring the dose to the skin, the extremities, and the lens of the eye. It gives guidance on how to decide if such dosemeters are needed and to ensure that individual monitoring is appropriate to the nature of the exposure, taking practical considerations into account. National regulations, if they exist, provide requirements that need to be followed. ISO…