Quality management - Guidelines to quality in project management
This National Standard of Canada is equivalent to International Standard ISo
10006:1997.
1 Scope
These guidelines use project management processes to serve as a framework to
discuss their application.
This International Standard is applicable to projects of varying complexity,
small or large, of short or long duration, in different environments, and
irrespective of the kind of…
Medical electrical equipment - Part 2: Particular requirements for the safety of equipment for extra...
This National Standard of Canada is based on the International Standard CEI/IEC 60601-2-36:1997 (First edition, 1997-03).
1. Scope and object
This clause of the General Standard applies except as follows:
1.1 Scope
Addition:
This Particular Standard applies to the safety of EQUIPMENT FOR EXTRACORPOREALLY INDUCED LITHOTRIPSY as defined in 2.1.101.
This applicability of this Particular…
This National Standard of Canada is equivalent to International Standard
CEI/IEC 155: 1993.
1 Scope
This standard specifies interchangeable glow-starters used with pre-heat type
fluorescent lamps, hereafter called "starters".
Section 1 specifies the general and safety requirements with which starters
shall comply.
Section 2 specifies the performance.
NOTE - Starters…
Textile Test Methods
Textiles - Tests for Colourfastness - Part E03: Colourfastness to Chlorinated
W...
This National Standard of Canada is equivalent to International Standard ISO
105-E03:1994.
1 Scope
This part of ISO 105 specifies a method for determining the resistance of the
colour of textiles of all kinds and in all forms to the action of active
chlorine in concentrations such as are used to disinfect swimming-pool water
(break-point chlorination).
Three alternative test conditions are…
Ships and marine technology — Small weathertight steel hatches
This International Standard specifies the main dimensions, location and number of fittings, materials and quality of manufacture for small weathertight steel hatches for application on board ships in order to ensure interchangeability of the hatches. The remaining dimensions are left to the manufacturer. The hatches are suitable for loading operations and for giving access to storage compartments…
Information technology — Fibre Distributed Data Interface (FDDI) — Part 6: Station Management (SMT)
This part of ISO/IEC 9314 specifies the Station Management (SMT) for the Fibre Distributed Data
Interface (FDDI).
FDDI provides a high bandwidth (100 megabits per second) general purpose interconnection among
computers and peripheral equipment using optical fibre as the transmission medium in a ring
configuration. FDDI can be configured to support a sustained transfer rate of approximately
80…
Residual current operated circuit-breakers without integral overcurrent protection for household and...
This National Standard of Canada is based on International Standard CEI/IEC 1008-1: 1990, (first edition, 1990-12), with Corrigendum 1990 and Amendments 1:1992 and 2:1995.
1. Scope
This International Standard applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating…
Auxiliaries for lamps - Starting devices (other than glow starters) - General and safety requirement...
This National Standard of Canada is based on International Standard CEI/IEC 926:1995
1. Scope
This standard specifies general and safety requirements for starting devices
(starters and ignitors) for tubular fluorescent and other discharge lamps for
use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting
pulses not greater than 100 kV and which are used in combination…