Inhalational Anaesthesia Systems - Part 3: Anaesthetic gas scavenging systems -
Transfer and receiv...
International Standard ISO 8835-3:1997 has been adopted with Canadian
deviations as CSA Standard CAN/CSA-Z8835-3-00.
1 Scope
This part of ISO 8835 specifies requirements for transfer and receiving systems
of active anaesthetic gas scavenging systems (AGSS) intended to reduce the
exposure of hospital personnel to anaesthetic gases and vapours. It does not
apply to nonactive AGSS (…
Terminal Units for Medical Gas Pipeline Systems - Part 1: Terminal Units for
Use with Compressed Med...
International Standard ISO 9170-1:1999 has been adopted with Canadian
deviations as CSA Standard CAN/CSA-Z9170-1-00.
1 Scope
This part of ISO 9170 specifies requirements for terminal units intended for
use in medical gas pipeline systems in accordance with ISO 7396-1, for use with
the following services:
- oxygen;
- nitrous oxide;
- air for breathing;
- carbon dioxide;
- oxygen/nitrous…
Terminal Units for Medical Gas Pipeline Systems - Part 2: Terminal Units for
Anaesthesia Gas Scaven...
International Standard ISO 9170-2:1999 has been adopted with Canadian
deviations as CSA Standard CAN/CSA-Z9170-2-00.
1 Scope
This part of ISO 9170 specifies the requirements and dimensions for terminal
units intended for use in anaesthetic gas scavenging disposal systems in
accordance with ISO 7396-2.
It is intended especially to ensure the type specificity of terminal units and…
Information technology — Telecommunications and information exchange between systems — X.25 DTE conf...
This part of ISO/IEC 8882 specifies a set of abstract tests for verifying that the implementation of X.25 protocols for use by Data
Terminal Equipment (DTE), conforms to the requirements of International Standards that specify those protocols.
Testing of a DCE is not subject of this test suite. Testing of a DTE in DCE mode is covered in test group 28 of this test suite
a) specifies a PIXIT…
Information technology — Telecommunications and information exchange between systems — X.25 DTE conf...
This part of ISO/IEC 8882 defines an abstract test suite for testing the conformance of the Data Link Layer of an IUT with
respect to ISO/IEC 7776 (1986, 1995) or the ITU-T Recommendation X.25 (1980, 1984, 1988, 1993).
Conformance of a Data Terminal Equipment (DTE) to the above ISO International Standard or ITU-T Recommendations is
tested using a dedicated circuit between the tester and the DTE.…
This International Standard describes the principles and methods for evaluating the performance of equipment
used for cleaning operations. Testing and sampling procedures are specified and methods of presenting test
results are detailed. Performance parameters are recommended and defined and their determination is formulated,
thereby allowing their use in evaluating, comparing and predicting…
Information technology - Telecommunications and information exchange between systems - X.25 DTE conf...
This part of ISO/IEC 8882 defines an abstract test suite for testing the conformance of the Data Link Layer of an IUT with
respect to ISO/IEC 7776 (1986, 1995) or the ITU-T Recommendation X.25 (1980, 1984, 1988, 1993).
Conformance of a Data Terminal Equipment (DTE) to the above ISO International Standard or ITU-T Recommendations is
tested using a dedicated circuit between the tester and the DTE.…
Information technology - Telecommunications and information exchange between systems - X.25 DTE conf...
This part of ISO/IEC 8882 specifies a set of abstract tests for verifying that the implementation of X.25 protocols for use by Data
Terminal Equipment (DTE), conforms to the requirements of International Standards that specify those protocols.
Testing of a DCE is not subject of this test suite. Testing of a DTE in DCE mode is covered in test group 28 of this test suite
a) specifies a PIXIT…
1. Scope
1.1
This Standard provides procedures for evaluating polymeric materials and parts
made from polymeric materials intended for application in electrical equipment
covered by the Canadian Electrical Code, Part II (CEC, Part II), with respect
to:
(a) flammability;
(b) mechanical properties;
(c) thermal properties;
(d) resistance to weathering; and
(e) electrical properties.
1…
Road vehicles — Mechanical coupling between tractors and semi-trailers — Part 1: Interchangeability ...
This International Standard specifies dimensions to ensure interchangeability between a tractor vehicle and a
coupled semi-trailer, the two together constituting an articulated vehicle. It specifies certain interchangeability
dimensions, including those of the gooseneck contour, as well as operating dimensions related to angle values. The
specifications permit the same semi-trailer to be used…
