Rechercher

ISO/IEC 14762:2009(E) specifies the general functional safety requirements for HBES following the principles of the basic standard for functional safety IEC 61508. This International Standard sets the requirements for functional safety for Home and Building Electronic Systems (HBES) products and systems, a multi-application bus system where the functions are decentralised, distributed and linked…

"This Standard applies to mineral fibre thermal insulation manufactured in the form of faced and unfaced batts, rolls and boards. This standard does not permit the application of kraft paper facings on batts and rolls. It also applies to loose fill mineral fibre thermal insulation when used in unconfined spaces with slopes not exceeding 4.5:12. This Standard specifies performance…

"La présente norme s'applique à l'isolant thermique de fibres minérales fabriqué sous forme de matelas, de rouleaux et de panneaux avec ou sans surfaçage. La présente norme ne permet pas l'application de surfaçages de papier kraft sur les matelas et les rouleaux. La norme vise également l'isolant thermique de fibres minérales en vrac utilisé dans des espaces non confinés…

1.1 Scope 1.1.1 This standard applies to newly produced, automatic storage water heaters having input ratings of 75,000 Btu/hr (21 980 W) or less (see Part IV, Definitions), hereinafter referred to as water heaters or appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with manufactured gas; c. For use with mixed gas; d. For use…

This Standard outlines requirements for Exterior Insulation and Finish Systems (EIFS), used in combination with a drained air-space and water resistive barrier, as a non-structural exterior wall cladding system. The use of mechanical fasteners is outside the scope of this Standard, but is acceptable as a complement and/or as an alternate to adhesive for attachment where the substrate will not…

"La présente norme spécifie les exigences relatives aux systèmes d'isolation par l'extérieur avec enduit mince (systèmes EIFS), utilisés avec un système de vide d'air et une barrière résistante à l'eau, en tant que systèmes de recouvrement mural extérieur non porteur. Les exigences liées à l'utilisation d'attaches mécaniques ne sont pas visées par la…

Scope 1.1 This Standard applies to single conductor and multi-conductor constructions, without metal sheath or armour, suitable for use in cable trays and other applications when installed in accordance with the Canadian Electrical Code, Part I. 1.2 The test and marking requirements of this Standard are in addition to the basic requirements for cable construction that appear in other published…

1 Domaine d'application 1.1 Cette norme prescrit les exigences de performances photométriques visant les luminaires de type cobra utilisés pour l'éclairage des routes, équipés de lampes à vapeur de sodium à haute pression (HPS) de 70 à 400 W. Note : Il est possible que les prochaines éditions de cette norme reconnaissent d'autres sources lumineuses comme les lampes aux halogénures…

Scope 1.1 This Standard applies to Specification TC 44 portable tanks. It specifies requirements for the design and construction of such tanks. Note: The certification, assembly, modification, repair, testing, inspection and periodic retesting, maintenance, and identification of such tanks are covered by CSA B620. Selection and use are covered by CSA B621. 1.2 The Transportation of…

This National Standard of Canada is based on International Standard ISO 19902:2007. Scope This International Standard specifies requirements and provides recommendations applicable to the following types of fixed steel offshore structures for the petroleum and natural gas industries: - caissons, free-standing and braced; - jackets; - monotowers; - towers. In addition, it is applicable…