Rechercher

201.1.1 *Scope [Add the following paragraph] This Standard applies to ME EQUIPMENT and ME SYSTEMS that are intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I.

Scope Replacement: This part of the 80601 International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of AUTOMATED SPHYGMOMANOMETERS, hereafter referred to as ME EQUIPMENT, which by means of an inflatable CUFF, are used for non-continuous indirect estimation of the BLOOD PRESSURE without arterial puncture. NOTE 1 Equipment that performs indirect DETERMINATION of the BLOOD…

1.1 Purpose The HSO 42002:2019 – Diagnostic Imaging Services Standard provides guidance to deliver quality and safe diagnostic imaging services. The standard promotes an integrated approach to diagnostic imaging where diagnostic imaging providers work with referring medical professionals not only to provide the services but to improve them. The standard addresses the structures and processes…

1.1 Objectif La norme Imagerie diagnostique HSO 42002:2019 fournit des conseils pour offrir des services d’imagerie diagnostique de qualité et sécuritaires. La norme favorise une approche intégrée des services d’imagerie diagnostique, là où les prestataires de ces services travaillent avec les professionnels de la santé qui acheminent les clients en vue d’offrir des services d’imagerie…

1 Scope This part of IEC 61400 presents measurement procedures that enable noise emissions of a wind turbine to be characterised. This involves using measurement methods appropriate to noise emission assessment at locations close to the machine, in order to avoid errors due to sound propagation, but far away enough to allow for the finite source size. The procedures described are different…

1 Scope 1.1 General This Standard provides criteria in accordance with the National Building Code of Canada, for the structural design and evaluation of structures or structural elements made from wood or wood products, including: a) graded lumber; b) glued-laminated timber; c) cross-laminated timber (CLT); d) unsanded plywood; e) oriented strand board (OSB); f) composite building…

1 Scope and application 1.1 General This Standard provides rules and requirements for the design, fabrication, and erection of a broad range of steel structures based on limit states design approach. The term “steel structures” refers to structural members and frames that consist primarily of structural steel components, including structural steel acting compositely with concrete, and…

1 Scope This clause of Part 1 is applicable, except as follows: Addition: This standard applies to hand-held hedge trimmers which are designed for use by one operator for trimming hedges and bushes, including extended-reach hedge trimmers with a maximum length of 3,5 m. NOTE 101 The measurement of the length for extended-reach hedge trimmers is specified in 21.101. This standard is not…

1 Domaine d'application L'article de la Partie 1 s'applique avec l'exception suivante: Addition: La présente norme s'applique aux taille-haies portatifs qui sont conçus pour être utilisés par un opérateur pour tailler les haies et les buissons, y compris les taille-haies télescopiques portatifs d’une longueur maximale de 3,5 m. NOTE 101 Le mesurage de la longueur…

Scope Replacement: This part of IEC 80601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ROBOTICALLY ASSISTED SURGICAL EQUIPMENT (RASE) and ROBOTICALLY ASSISTED SURGICAL SYSTEMS (RASS), hereafter referred to as ME EQUIPMENT and ME SYSTEMS together with their INTERACTION CONDITIONS and INTERFACE CONDITIONS. If a clause or subclause is specifically intended to be applicable to ME…