Rechercher

Scope This clause of part 1 is replaced by: This standard deals with the safety of electric instantaneous water heaters for household and similar purposes and intended for heating water below boiling temperature, their rated...

1.1 Purpose The purpose of this Standard is to provide a framework for consistent recording and classification of information on work-related injuries and diseases in Canada. Such information may be used to make comparisons...

This Standard will become a NSC 1.1 Application This Standard applies to single- and multi-section buildings supported on longitudinal floor beams, or perimeter rim joists designed to perform as beams. 1.2 Issues addressed...

1.1 La présente norme s'applique aux disjoncteurs de sécurité de la classe A, individuels et triphasés destinés à la protection du personnel, destinés à être utilisés uniquement dans des systèmes neutres mis à la terre...

Scope 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used in non-hazardous locations in accordance with the Canadian Electrical Code, Part I, CSA C22.1, the provisions of the...

1.1.1 This standard applies to motor control centres to be used in accordance with the U.S. National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code, Part I, CSA C22.1, and the Mexican Electrical Installations...

1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or...

1.1 Products covered 1.1.1 This standard applies to motor control centres to be used in accordance with the U.S. National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code, Part I, CSA C22.1, and the Mexican...

1.1 General This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or...

1.1 Cette norme s'applique aux tubes électriques non métalliques ondulés (ENT) et aux raccords fixés mécaniquement, à utiliser conformément à C22.1, Code canadien de l'électricité, partie I (code CE), NFPA 70, Code national...

Remarque : L'activité d'élaboration de normes pour cet avis d'intention (publié à l'origine le 25 avril 2023) a été mise à jour par l'OEN responsable le 13 février 2024. Remarque : À la demande de l'OEN responsable, cet avis...

Ces exigences s'appliquent aux connecteurs et aux prises de véhicule désignés comme coupleurs à charge mégawatt et configurés comme tels. Ces dispositifs sont homologués pour un courant allant jusqu'à 1500 V c.c. et 3000 A en...