CSA C50064:24
1 Scope
This document applies to wrought aluminium and aluminium alloy enclosures and their welding. These
enclosures are pressurized with dry air, inert gases, for example sulphur hexafluoride or nitrogen or a
mixture of such gases, used in indoor and outdoor installations of high-voltage switchgear and controlgear
with rated voltages above 1 kV, where the gas is used principally for its dielectric and/or arc-quenching
properties with rated voltages.
— above 1 kV and up to and including 52 kV concerning gas-filled compartments with design pressure
higher than 300 kPa relative pressure (gauge);
— above 52 kV concerning all gas-filled compartments.
The enclosures comprise parts of electrical equipment not necessarily limited to the following examples:
— circuit-breakers;
— switch-disconnectors;
— disconnectors;
— earthing switches;
— current transformers;
— voltage transformers;
— surge arrestors;
— busbars and connections;
— etc.
The scope also covers enclosures of pressurized components such as the centre chamber of live tank
switchgear, gas-insulated current transformers, etc.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
29.130.10
Statut:
Norme
Date de Publication:
2024-11-30
Numéro Standard:
CSA C50064:24