CSA Z275.2:20
1 Scope
1.1 General
1.1.1
This Standard applies to occupational diving operations conducted in connection with all types of work and employment, and describes the requirements for occupational safety.
Note: It is recognized that certain underwater tasks might require specialized standards of practice and/or operational techniques that differ from the requirements of this Standard yet may be acceptable to the authority having jurisdiction. Users should consult applicable provincial and federal occupational safety and health regulations to determine whether they impose safety requirements additional to or more stringent than those of this Standard.
1.1.2
This Standard addresses equipment requirements and operational procedures for the following diving systems:
a)
SCUBA diving systems (see Clause 7);
b)
surface-supplied diving systems (see Clauses 8and 9);
c)
deep diving systems (see Clause 9);
d)
one-atmosphere diving systems (see Clause 10); and
e)
diving in contaminated environments (see Clause 11).
1.2 Limitations
1.2.1
This Standard does not apply to scientific diving as defined in Clause 3.
1.2.2
This Standard does not apply to diving operations performed solely for sport or recreation.
1.2.3
This Standard does not include work techniques associated with underwater diving operations.
1.3 Terminology
In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard.
Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material.
Notes to tables and figures are considered part of the table or figure and may be written as requirements.
Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
1.4 Units of measurement
The values given in SI units are the units of record for the purposes of this Standard. Where values are given in parentheses, they are for information and comparison only.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
97.220.40
Statut:
Norme
Date de Publication:
2020-01-31
Numéro Standard:
CSA Z275.2:20