CAN/CGSB-44.232-2018
This standard applies to chairs used in office environments including chairs for computer uses and non-computer
(occasional) uses i.e. conference (w/Table) and guest applications (Side chair).
The dimensions given in this standard aim to respect generally accepted ergonomic guidelines and design
requirements such as those of CAN/CSA-ISO 9241-5 and BIFMA G1-2013, along with the best practices and
knowledge of the committee members.
The dimensions specified in this standard aim to address the needs of the 5th to 95th percentile of North American
adult office workers when in the seated position using the Civilian American European Surface Anthropometry
Resource (CAESAR) database. Designing products to fit the 5th percentile female body dimensions to the 95th
percentile male body dimensions will accommodate a large number of users. It is important, however, to realize
that furniture for the above range may not accommodate at least 5 % of the users for any particular dimension. In
order to accommodate user characteristics falling outside the 5th to 95th percentile ranges, it may be necessary to
purchase products that are not within that range. Be aware that some fixed chair features are not recommended
for computer uses (See Annex A, Table A.1) as these dimensions will only accommodate or address the needs of a
part the 5th to 95th percentile.
It is important that persons using this standard to purchase/specify products understand the task(s) to be performed
by, the characteristics of the intended user population and the physical and organizational environment where
the chairs will be deployed when selecting specific features. The configuration options available in this standard
are complex and if not specified correctly, some combinations, while meeting the requirements of the standard,
may result in chairs that are inappropriate for some users or applications. To minimize the possibility of incorrect
specification, the user of this standard is encouraged to refer to Table A1 for recommended features.
Annex A is an informative annex that contains recommended features and specifications for general user profiles.
Quantities and dimensions used in this standard are given in metric units with imperial equivalents following in
brackets where appropriate. The metric units shall be regarded as official in the event of dispute.
The testing and evaluation of a product against this standard may require the use of materials and/or equipment
that could be hazardous. This document does not purport to address all the safety aspects associated with its use.
Anyone using this standard has the responsibility to consult the appropriate authorities and to establish health and
safety practices in conjunction with any applicable regulatory requirements prior to its use.
OEN:
ONGC
Langue:
English
Code(s) de l'ICS:
97.140
Statut:
Annulée
Date de Publication:
2018-09-30
Numéro Standard:
CAN/CGSB-44.232-2018