CAN/CGSB-3.0 No. 18.5-2006
1. SCOPE
1.1 This method is intended for the semi-quantitative (i.e., ±25%1) determination of ethyl mercaptan odorant (within the
range of 5 to 85 mg/L) in liquid propane. It is important to confirm that recently stenched propane is odorized to the
required level. The method is intended for field application and may be suitable for use by non-laboratory personnel
after suitable training. A gas chromatographic method should be used for more precise, quantitative determination of
ethyl mercaptan in propane.
1.2 Other low molecular weight mercaptans, such as methyl mercaptan, can interfere by giving a positive result.
1.3 The primary stain tube described in this method is suitable for Grade 1 propane but is not suitable for Grade 2
(commercial) propane, which normally contains more than 5% propylene by volume.
1.4 The testing and evaluation of a product against this method may require the use of materials and/or equipment that
could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone
using this method has the responsibility to consult the appropriate authorities and to establish appropriate health and
safety practices in conjunction with any applicable regulatory requirements prior to its use.
OEN:
ONGC
Langue:
English
Code(s) de l'ICS:
75.160.30;
71.040.40;
19.020
Statut:
Annulée
Date de Publication:
2006-03-31
Numéro Standard:
CAN/CGSB-3.0 No. 18.5-2006