C22.2 No. 210-05 (R2010)

1 Scope 1.1 This Standard applies to single- or multiple-conductor, round, flat, or coiled appliance wiring material products classified as follows: (a) Class I ? internal wiring of equipment (single- or multiple-conductor constructions with or without a covering or jacket): (i) Group A ? not subject to mechanical abuse; and (ii) Group B ? potentially subject to mechanical abuse: (1) wet; and (2) oil; and (b) Class II ? external/interconnecting wires (single- or multiple-conductor constructions with a jacket): (i) Group A ? not subject to mechanical abuse; and (ii) Group B ? potentially subject to mechanical abuse: (1) wet; and (2) oil. Notes: (1) As there is a great variety of applications for appliance wiring material products, the use of such a product should be evaluated with the design and construction of the end-use application in mind and should not be judged solely by the requirements of this Standard. (2) Class I and II products are Group A, B, or both. (3) Group markings (A, B, or both) relate to tests performed on the individual insulated conductors. Group marking that includes both A and B means all insulated conductors pass Group B tests. 1.2 Clauses 1 to 6 are general in nature and apply, unless otherwise noted, to the appliance wiring material products covered by Clauses 7 to 10. 1.3 This Standard also applies to appliance wiring material products that have a jacket or overall insulating covering and are used to connect or interconnect data processing and similar systems in accordance with the Canadian Electrical Code, Part I.