CAN/CSA-ISO/IEC 13868:04 (R2017)

This National Standard of Canada is equivalent to International Standard ISO/IEC 13868:2003 (second edition, 2003-04-01). 1 Scope This International Standard specifies the signalling protocol for the support of name identification supplementary services at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). The name identification supplementary services are Calling Name Identification Presentation (SS-CNIP) and Connected Name Identification Presentation (SS-CONP). Calling Name Identification Presentation (CNIP) is a supplementary service which is offered to the called user and which provides the name of the calling user (calling party name) to the called user. Connected Name Identification Presentation (CONP) is a supplementary service which is offered to the calling user and which provides to the calling user the following: - the name of the user who answers the call (connected party name); - optionally the name of the alerting user (called party name); - optionally the name of the called user who cannot be reached (busy party name). The supplementary service Calling/Connected Name Identification Restriction (CNIR) has no impact on the signalling at Q reference point. Provision of a user's name to the PISN is outside the scope of this International Standard. The Q reference point is defined in ISO/IEC 11579-1. Service specifications are produced in three stages according to the method specified in ETS 300 387. This International Standard contains the stage 3 specification for the Q reference point and satisfies the requirements identified by the stage 1 and stage 2 specifications in ISO/IEC 13864. The signalling protocol for SS-CNIP and SS-CONP operates on top of the signalling protocol for basic circuit switched call control, as specified in ISO/IEC 11572, and uses certain aspects of the generic procedures for the control of supplementary services specified in ISO/IEC 11582. This International Standard also specifies additional signalling protocol requirements for the support of interactions at Q reference point between name identification supplementary services and other supplementary services and ANFs. This International Standard is applicable to PINXs which can be interconnected to form a PISN.