CAN/CSA-C862-01 (R2006)

1. Scope 1.1 This Standard describes testing procedures and states the performance requirements for general service incandescent reflector lamps. 1.2 This Standard includes performance requirements for(a) (a) wattage; (b) lamp efficacy; (c) centre-beam intensity; and (d) rated life. 1.3 This Standard applies to incandescent reflector lamps designed for general lighting use that have (a) a rated wattage from 40 W up to and including 205 W; (b) a rated voltage or voltage range that is at least partially between 100 and 130 V ; (c) an E26/24 single contact, or E26/50x39 skirted, medium screwbase; and (d) a bulb diameter > than 70 mm. 1.4 This Standard does not apply to (a) coloured lamps; (b) lamps that (i) are of rough (or vibration) service type and are specifically marked and marketed as rough (or vibration) service lamps (ii) have a lens containing at least 5% neodymium oxide; (iii) have a coating or other containment system to retain glass fragments if the lamp is shattered, and are specifically marked and marketed as impact resistant lamps; or (iv) contain a filter that suppresses yellow and green portions of the spectrum and are specifically marked and marketed for plant growth use; (c) infrared heat lamps; (d) lamps used in mines or in airfield, aircraft, automotive, marine, aquarium terrarium, or vivarium applications; (e) a bulb shape designated as BR as described in ANSI Standard C79.1 with (i) a diameter of 95.25 mm (BR 30) and a rated power of < 66 watts; (ii) a diameter of 95.25 mm (BR 30) and a rated power of 85 watts; or (iii) a diameter of 120.65-127 mm (BR 30-40) and a rated power of < 121 watts; (f) bowl-mirror lamps (eg, silverbowl); or (g) lamps for heat-sensitive application (ie, dichroic cool beam).