B137.9-99

1. Scope 1.1 This Standard provides requirements for macrocomposite pipe consisting of a welded aluminum tube laminated by a melt adhesive to layers of polyethylene inside and outside the aluminum tube. The Standard also provides requirements for fittings (connectors) for use with this composite pipe. The pipes considered in this Standard are for use in potable water supply systems and are pressure-rated for 1380 kPa (200 psi) at 23°C and/or 1035 kPa (150 psi) at 60°C. 1.2 The Standard includes requirements for materials, quality of work, dimensions, thermocycling resistance, sustained pressure performance, delamination resistance, and marking. Notes: (1) In developing the hydrostatic design basis for the pipes, in accordance with CSA Standard B137.0, the fibre stress has been replaced by pressure. (2) The pressure rating of macrocomposite pipes is sensitive to the thickness of the aluminum metal reinforcing layer. Pipes having the same dimension ratio but different metal reinforcing layer thicknesses will have different pressure ratings. Dimension ratio therefore cannot be used, as it is with homogeneous walled pipes, for assessing changes in pressure rating with wall thickness variation. 1.3 The values given in SI (metric) units are the standard. The values in parentheses are for information only.