B182.1-96

1. Scope 1.1 This Standard covers the following: (a) plastic drain and sewer pipe and plastic pipe fittings with pipe stiffness of 275, 320, or 625 kPa, including both single-wall and co-extruded dual-wall pipe with a smooth interior; (b) single-wall or coextruded, noncorrugated, perforated plastic pipe and plastic pipe fittings; (c) co-extruded dual-wall perforated plastic pipe with a smooth interior and corrugated exterior; and (d) solvent cement. Notes: Industrial waste-disposal lines should be installed only with the specific approval of the regulatory authority, since chemicals not commonly found in drains and sewers and temperatures greater than 60°C may be encountered. 1.2 The values given in SI (metric) units are the standard. The values given in parentheses are for information only. 1.3 Notes to the text do not include mandatory or alternative requirements. The purpose of a note is to separate from the text explanatory or informative material that is not properly a part of the Standard. Notes to figures and tables are to be considered part of the figure or table and are written as mandatory requirements. Legends to figures are to be considered mandatory requirements.