CAN/CGSB-25.1 No. 2-95
1. SCOPE
1.1 This method describes three procedures for determining the flash point
of waxes, polishes and related materials.
1.2 The procedures outlined in par. 3.1 and 5.1 apply to liquids with a
kinematic viscosity below 5.5 mm²/s (Note 1) at 40°C, or below
9.5 mm²/s at 25°C, and a flash point below 93°C.
1.3 The procedure outlined in par. 4.1 applies to liquids with the
following properties: a kinematic viscosity of 5.5 mm²/s or more at
40°C; a kinematic viscosity of 9.5 mm²/s or more at 25°C; a flash point
of 93°C or higher; a tendency to form a surface film under test
conditions; or containing suspended solids.
1.4 The testing and evaluation of a product against this method may require
the use of materials and/or equipment that could be hazardous. This
document does not purport to address all the safety aspects associated
with its use. Anyone using this method has the responsibility to
consult the appropriate authorities and to establish appropriate health
and safety practices in conjunction with any existing applicable
regulatory requirements prior to its use.
Note 1: Stokes (St) = 100 mm²/s
OEN:
ONGC
Langue:
English
Code(s) de l'ICS:
75.140;
19.020
Statut:
Annulée
Date de Publication:
1995-07-30
Numéro Standard:
CAN/CGSB-25.1 No. 2-95