B181.5-95

1.1 This Standard applies to coextruded thermoplastic drain, waste, and vent pipe with an outer layer of acrylonitrile-butadiene-styrene (ABS) and an inner layer of polyvinyl chloride (PVC) or with outer and inner layers of acrylonitrite-butadienne-styrene (ABS) and a core of polyvinyl chloride (PVC), to be used with fittings, accessories, and solvent cement meeting the requirements of CSA Standard CAN/CSA-B181.1. 1.2 This Standard includes requirements for materials, workmanship, dimensions and tolerances, impact strength, chemical resistance, water resistance, dimensional stability, compression strength, extrusion quality, and bond strength. Note: Recommended storage, handling, and installation practices for coextruded ABS/PVC DWV pipe are the same as those given in CSA Standard CAN/CSA-B181.1, Appendix A. Use of these recommended practices will help to ensure proper installation and optimum service life. 1.3 The values given in SI (metric) units are the standard. The values given in parentheses are for information only. 1.4 Notes to the text do not include mandatory or alternative requirements. The purpose of a note is to separate from the text explanatory or informative material that is not properly a part of the Standard. Notes to figures and tables are to be considered part of the figure or table and are written as mandatory requirements. Legends to figures are to be considered mandatory requirements.