CAN/CSA-B182.1-M92

Plastic Drain and Sewer Pipe and Pipe Fittings
1. Scope 1.1 This Standard covers the following: (a) plastic drain and sewer pipe and plastic pipe fittings in the size range NPS-2 through NPS-6 with pipe stiffness of 275, 320, or 625 kPa, including both single-wall and co-extruded dual-wall pipe with a smooth interior; (b) single-wall, noncorrugated, perforated plastic pipe and plastic pipe fittings; (c) co-extruded dual-wall perforated plastic pipe with a smooth interior and corrugated exterior; and (d) solvent cement. Note: Industrial waste disposal lines should be installed only with the specific approval of the regulatory authority, since chemicals not commonly found in drains and sewers and temperatures greater than 60°C may be encountered. 1.2 The values given in SI (metric) units are the standard. The values given in parentheses are for information only.
OEN:
CSA
Langue:
English
Code(s) de l'ICS:
23.040.20; 23.040.45
Statut:
Annulée
Date de Publication:
1992-03-30
Numéro Standard:
CAN/CSA-B182.1-M92