Rechercher

1 Scope 1.1 General This Standard concerns high-pressure containers for the on-board storage of natural gas as a fuel for automotive vehicles. This Standard contains requirements for the material, design, manufacture, and testing of serially produced, refillable Type NGV 2 containers intended for the storage of compressed natural gas (CNG) for vehicle operation. These containers are to be…

1 Scope 1.1 General This Standard applies to the protection of workers from the hazards arising from the use of mobile or stationary machinery. It provides the criteria to be observed and the description, selection, and application of guards and protective devices. Where a current CSA standard exists for a specific type of machinery (e.g., CSA B167, CAN/CSA-B354.2, CSA M424.1, CSA Z142, CSA…

1 Scope 1.1 Application This Standard specifies requirements for the selection and installation of backflow preventers. Additional information on how backflow due to back siphonage and back pressure occurs, and how to select and apply specific devices, is included in Annexes A, B, and C. 1.2 Exclusions 1.2.1 Product exclusions This Standard does not cover a) construction requirements or…

1 Scope 1.1 This Standard applies to all types of electric cranes, including electric overhead travelling cranes, and hoists for vertical lifting and lowering of freely suspended load for voltages of 750 V and less between conductors. The equipment specified in this Standard is intended for installation in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to the…

1 Scope 1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General…

Scope This National Standard of Canada applies to four types of middle distillate fuel oils that are suitable for use in liquid fuel burning equipment without preheating [types 0, 1, 2 and 2(B6-B20)], and three types of fuel oils that contain residual fuel components that require preheating (types 4, 5 and 6). The heating fuel oils covered by this standard are intended for use in oil burning…

Objet La présente Norme nationale du Canada s’applique à quatre types de mazout de distillat moyen destinés à de l’équipement à combustible liquide sans préchauffage [types 0, 1, 2 et 2(B6-B20)] et à trois types de mazout contenant des composants résiduels et nécessitant un préchauffage (types 4, 5 et 6). Les mazouts de chauffage visés par la présente norme sont destinés à de l’équipement de…

1 Scope 1.1 Purpose This Standard establishes minimum requirements for electrical work and electrical equipment operating, or intended to operate, at a mine. Note: Users should be aware that federal, provincial, and territorial legislation can impose additional requirements. 1.2 Application This Standard is supplementary to, or amendatory of, the requirements of the Canadian Electrical Code…

1 Scope 1.1 Scope of Guideline This Guideline applies to the design, evaluation, and structural rehabilitation design of standalone pedestrian, cycling, and multiuse bridges in Canada. The Guideline also includes technical clauses related to geometric design, accessibility, safety, durability, and sustainability. There is no limit on span, but this Guideline does not necessarily cover all…

1 Domaine d’application 1.1 Généralités Cette norme a pour but de former la base d’un SGQ dans une installation de soins de santé ou dans un domicile, dans le but d’offrir des traitements de dialyse rénale sûrs et fiables. Note : L’usage de cette norme et des normes connexes suivantes permet de mettre en oeuvre un SGQ global : a) CAN/CSA-C22.2 nº 60601-1; b) CAN/CSA-C22.2 nº 60601-2-16; c…