Rechercher

This document defines the general requirements for the constituent products of steels and steel products used in the execution of structural steelwork as structures or as fabricated components in conjunction with ISO 17607-1. Additional requirements to be addressed in the execution of structural steelwork, as structures or as fabricated components, can be found in other parts of the ISO 17607…

The design method provided in this document addresses vibration induced by walking action of occupants and covers the following timber floor systems: a)       Light frame floors built with timber joists spaced at a distance of no more than 610 mm with a layer of structural wood-based subfloor that is connected to the joists using mechanical fasteners or adhesive. The area density of a bare light…

Le présent document spécifie des modes opératoires et des conditions permettant de déterminer le flux thermique au sein de systèmes de chauffage électrique de surface par rapport à la température nominale du medium des systèmes. La détermination des performances thermiques des systèmes de chauffage électrique de surface et leur conformité au présent document sont déterminées grâce à des calculs…

This document defines: —     communication modes for Near Field Communication Interface and Protocol 1 (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection of computer peripherals; —     both the active and the passive communication modes of NFCIP-1 to realize a communication network using Near Field Communication (NFC) devices for networked…

This document specifies procedures and conditions to enable the heat flux in electrical surface heating systems to be determined relative to the medium differential temperature for systems. The determination of thermal performance electrical surface heating systems and their conformity to this document is carried out by calculation in accordance with design documents and a model. This enables a…

This document specifies protocol test methods for Near Field Communication Interface and Protocol 1 (NFCIP-1), as defined in ISO/IEC 18092 (the base standard). The radio frequency (RF) test methods for NFCIP-1 (also defined in ISO/IEC 18092) are specified in ISO/IEC 22536.

This document defines the basic terms relating to electrical disturbances from conduction and coupling used in the other parts of the ISO 7637 series. It also gives general information on the whole ISO 7637 series.

IEC 60567:2023 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60567:2023 edition 5.0 and the previous IEC 60567:2011 edition 4.0. Furthermore, comments from IEC TC 10 experts are provided to explain the reasons of the most relevant changes, or to clarify any part of the content…

This document defines: — communication modes for Near Field Communication Interface and Protocol 1 (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection of computer peripherals; — both the active and the passive communication modes of NFCIP-1 to realize a communication network using Near Field Communication (NFC) devices for networked…

This document specifies protocol test methods for Near Field Communication Interface and Protocol 1 (NFCIP-1), as defined in ISO/IEC 18092 (the base standard). The radio frequency (RF) test methods for NFCIP-1 (also defined in ISO/IEC 18092) are specified in ISO/IEC 22536.