IEC PAS 63629:2025 sets out the specific rules for luminaires and defines the product specifications to be adopted by manufacturers in the development of their Product Environmental Profiles (PEP) particularly with regard to:
- the technology and its type of application,
- the conventional typical lifetime taken into account for the Life Cycle Assessment (LCA),
- the conventional use scenarios…
Chariots de manutention à moteur à combustion interne
Domaine d’application
1.1 Ces exigences portent sur les aspects de sécurité incendie des chariots de manutention équipés de
moteurs à combustion interne, tels que les chariots tracteurs, les chariots élévateurs à plateforme, les
chariots élévateurs à fourche et d’autres véhicules spécialisés destinés à un usage industriel. Ces
exigences ne couvrent pas d’autres aspects de sécurité potentiels…
Plastics — Determination of specific volume as a function of temperature and pressure, pvT diagram —...
This document describes procedures for determining the specific volume of plastics as a function of temperature and pressure in both the molten and solid states.
This document specifies the use of a piston-equipped apparatus in which the test sample, held in a measurement cell, is pressurized by means of the piston. Measurements under conditions of constant pressure or constant temperature can be…
Cuir — Essais physiques et mécaniques — Détermination de la déformabilité
ISO 17236:2016 spécifie une méthode permettant de déterminer la déformabilité du cuir. Elle est destinée à être appliquée aux cuirs d'ameublement mais elle est également applicable à tous les cuirs souples.
Leather — Physical and mechanical tests — Determination of extension set
This document specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers.
Footwear — Critical substances potentially present in footwear and footwear components — Determinati...
This document specifies a method to quantify residues of certain organic solvents (see Annex A) in footwear materials with gas chromatography-mass spectrometry (GC-MS).
This document is applicable to footwear materials where there is a risk for the presence of certain solvent residues (e.g. solvent present in glues, leather finishing and coated textiles, plastics, rubber).
Chaussures — Substances critiques potentiellement présentes dans les chaussures et les composants de...
Le présent document spécifie une méthode pour la quantification des résidus de certains solvants organiques (voir l’Annexe A) dans les matériaux des chaussures par chromatographie en phase gazeuse couplée à la spectrométrie de masse (GC-MS).
Le présent document est applicable aux matériaux des chaussures susceptibles de contenir certains résidus de solvant (par exemple solvant présent dans les…
Inland navigation vessels — Small floating working machines — Requirements and test methods
This document is applicable to small floating working machines used for work in, over, or on, inland waters. This document specifies safety-related requirements and test methods.
This document specifies minimum requirements for small floating working machines with a length of < 10 m and a product of length, width and depth of less than 30 m3, with temporarily or permanently installed work…
Software and systems engineering — Capabilities of build and deployment tools
This document defines the requirements for capabilities of build and deployment tools to support and automate building, packaging, and deploying work.
This document is intended for use in evaluating and selecting build and deployment tools according to the procedures defined in ISO/IEC 20741.
This document is applicable to different development methodologies and approaches (e.g. Waterfall, Agile…
Space systems — Launch complexes modernization process — General requirements
This document specifies procedures in the preparation and carrying out of the modernization process of launch complexes and their components. These procedures are devised in case there is a need to make changes in existing configuration of launch complexes.
This document establishes the following:
a) modernization stages;
b) modernization performance requirements;
c) functions…
